PNEUMATIC RADIATOR CORE BUILDER MACHINE WITH TUBE DISTRIBUTION
DEVICE
Introduction
The radiator core builder machine is used to assemble cores based
on a combined control of a mechanical
and pneumatic mechanism and the electrical control system of PLC,
and touch screen. The flat tubes, fins,
side plates and header plates are manually placed on the work
table.
Features
The flat tubes are distributed through a servo tube distribution
device. And the overall comb teeth structure could ensure
the flat tube positioning accuracy.
The radiator core builder machine is designed with 2-hand push
buttons for safety operation.
The equipment is easy for operation, adjustment, and tooling
replacement.
Parameters of Radiator Core Builder Machine
| Core Dimension | Core height direction | 350-780mm |
| Core width direction | 200-680mm |
| Flat Tube Layers | 1 layer/2layers |
| Tube Laying Mode | Automatic Feed Into Material Silo/ Manual |
| Flat Tube Flaring Mode | Automatic /Manual |
| Fin Laying Mode | By fin tray /Manual |
| Production Capacity | Around 30sets/hour |
| Drive Mode | Servo /Pneumatic |
| Overall Dimension | 2300*2500*1800mm |
| Weight | 2300kg |
Company Introduction
Our company mainly supplies the radiator making machines for
brazing radiators. The machines for making
brazing radiators include the following: aluminum radiator fin
machine, radiator core builder machine, radiator
plastic tank crimping machine, air leak tester, header mold,
plastic tank mold, etc. The machines for making
mechanical radiators include the following: high seed fin press,
progressive fin die, aluminum radiator tube fin
expansion machine, aluminum radiator tube-header expansion machine,
radiator plastic tank clinching machine,
hydraulic press, etc.
