Programmable Spray Testing Salt Mist Test Chamber Touch Panel
Applications:
The salt spray test chamber is a climate simulation device that
tests the corrosion of electronic equipment, metallic material, as
well as some surface treatment--coating, galvanizing,
organic/inorganic coating, anodizing treatment, rust-proof oil
coating, etc. Performance indicators in line with requirements of
GB / T5170.8 Electrical and Electronic Products, Environmental
Testing Equipment, the Basic Parameters of the Test Method. The
salt spray corrosion test chamber according to GB / T2423.17
Electronic and Electrical Products Basic Environmental Test
Procedures Test Ka: Salt Spray Test Method for neutral salt spray
test can also be used for acetic acid salt test.
The salt spray test chamber is a climate simulation device that
tests the corrosion of electronic equipment, metallic material, as
well as some surface treatment--coating, galvanizing,
organic/inorganic coating, anodizing treatment, rust-proof oil
coating, etc. Performance indicators in line with requirements of
GB / T5170.8 Electrical and Electronic Products, Environmental
Testing Equipment, the Basic Parameters of the Test Method. The
salt spray corrosion test chamber according to GB / T2423.17
Electronic and Electrical Products Basic Environmental Test
Procedures Test: Salt Spray Test Method for neutral salt spray test
can also be used for acetic acid salt test.
Salt spray corrosion test chamber:
Salt spray corrosion test chamber is the use of salt spray
corrosion to test the reliability of the tested samples
respectively corrosion resistance, salt spray refers to the
atmosphere by the dispersion system composed of tiny droplets of
salt, is an artificial environment in the three defense series,
many enterprises need to simulate the destructive nature of the
climate around the sea on the product, so the salt spray test
chamber should be carried out. Salt spray test is divided into two
kinds of neutral salt spray and acid salt spray, the difference is
that the standards and test methods are different.
Compound salt spray test chamber:
It breaks through the concept of the traditional salt spray test
chamber, combined with the function of alternating salt spray test,
and has experimental environments such as hot air drying, damp
heat, and salt spray.
Both products can be customized.
| Inside box size(cm) | 60x45x40 | 90x60x50 | 120x80x50 |
| Outside box size(cm) | 107x60x118 | 141x88x128 | 190x110x140 |
| Testing room temperature | Salt test (NSS ACSS)35℃±1℃/ Corrosion Test (CASS)50℃±1℃ |
| Pressure barrel temperature | Salt test (NSS ACSS)47℃±1℃/ Corrosion Test (CASS)63℃±1℃ |
| Brine temperature | 35℃±1℃ 50℃±1℃ |
| Testing room Capacity | 108L | 270L | 480L |
| Brine tank capacity | 15L | 25L | 40L |
| Salt concentration | The concentration of sodium chloride 5% or the 5% concentration of
sodium chloride add 0.26g per liter of copper chloride (CuCl2 2H2O) |
| Air pressure | 1.00±0.01kgf/cm2 |
| Spray volume | 1.0~2.0ml/80cm2/h (working at least 16 hours, and then take the
average) |
| Testing room relative humidity | 85% above |
| PH | 6.5~7.2 3.0~3.2 |
| Spray form | Programmable spray (Including continuous and intermittent spray) |
| power | AC220V1Φ10A | AC220V1Φ15A | AC220V1Φ20A
|
We keep good quality and competitive price to ensure our customers
benefit ; We respect every customer as our friend and we sincerely
do business and make friends with them,no matter where they come
from. Each batch of parts is done quality sampling inspection
before into the warehouse, and Each product before delivery is
tested by the national authoritative third-party inspection agency
Customer Support Services:
Ø Installation
Ø Training (Training customer employees)
Ø Calibration
Ø Preventative maintenance
Ø Replacement parts
Ø Assistance via phone or internet
Ø On-site diagnosis and repair/online diagnosis and repair
