BXT-GN20BAXIT automatic Micromoisture tester BXT-WS400
Brief introduction:
Before using this product, please read the instruction manual
carefully, understand the content, understand the technical
parameters, performance and operation method of the equipment, and
strictly comply with the relevant standards of electrical
high-voltage test and electrical safety working rules. Please keep
this instruction manual in an accessible position for future
reference.
The use of this product shall comply with the local requirements
for the use of this kind of equipment (if any), and relevant test
requirements, standards, procedures, etc., and the use of this
product shall comply with the local requirements for the safety of
electric power operation.
functional characteristics
Karl-fishecoulomb titration method is widely used for accurate
measurement of trace moisture content in samples. It has the
advantages of high accuracy and low cost. This instrument is based
on the principle of Carl-Fischer Coulomb titration, accurate
determination of liquid, solid, gas trace water, used in electric
power, petroleum, chemical, pharmaceutical, food and other
industries.
Main technical features and functions of BXT-WS400 trace moisture
tester:
The instrument adopts a powerful new generation processor and a new
peripheral circuit, excellent low power consumption; As the
criterion of the end of electrolysis, the stability and accuracy of
the measurement electrode signal are the key factors affecting the
measurement accuracy. Because of the use of advanced devices and
methods, the accurate detection of the measurement electrode signal
is realized. To further understand the characteristics of
electrolyte, a new software compensation and correction algorithm
is proposed to improve the measurement accuracy. Chinese character
graphic LCD screen, display interface intuitive and friendly.
Note: Users can choose battery according to the actual needs to
achieve portable function!
It mainly has the following functional features:
● Dot matrix LCD screen, touch button, friendly man-machine
interface;
The use of switching constant-current source electrolytic circuit,
reduce the instrument power consumption;
● instrument battery (optional), fully charged battery, in the
usual working state can be used for more than 6 hours;
● Perfect battery charging circuit, and battery power detection and
display function; (Portable instrument with battery)
● High precision measurement electrode signal generation and
detection circuit, make the judgment of electrolytic end point fast
and accurate, and has a strong anti-interference ability;
The use of electrolyte blank current compensation, balance drift
compensation and other methods to correct the measurement results;
The measurement electrode signal is displayed in the form of bar
diagram on the LCD screen, indicating the water content of the
electrolyte directly;
In the process of electrolysis, the change curve of the speed of
electrolysis is described in real time. The user can monitor the
whole process of electrolysis, and can judge whether the
electrolyte fails according to this curve;
● With measuring electrode open fault, short circuit fault
automatic detection function;
● Automatic storage of historical records with time markers, up to
500 stores;
● Calendar clock with temperature compensation, accurate travel
time, automatic record of the measured date and time, can run in
the state of power failure.
