High Temperature Static Vacuum Pharmaceutical Dryer With GMP
Certification
Product Description of Vacuum Drying Machine
The vacuum drying is the process that the raw material dried in the
vacuum situation, and take out the wet moisture at the same time by
vacuum pump. Usually for low temperature drying and solvent
recovery, also can for different kind product drying, and reach GMP
requirement.
Suitable for heat sensitive material that easy decomposed,
polymerized and metamorphous under high temperature. It is widely
used in pharmaceutical, chemical, food, electronics and other
industries.
Product Parameters of Vacuum Drying Machine
| Item | Specification |
| Model | SED-10FZG-H |
Interior size of chamber (mm) | 1500×1800×1220 |
Exterior size of chamber (mm) | 1924×2500×1513 |
Layers of baking shelf | 10 |
Interval of baking shelf (mm) | 122 |
Operation temperature of baking support | ≤150℃ |
Weight (kg) | 3200 |
WORK PRINCIPLE of Vacuum Drying Machine
The so-called vacuum drying, that is, the material under vacuum
conditions, heating drying. If the vacuum pump is used for pumping
and dehumidifying, the drying speed is accelerated.
Note: if the condenser is used extra, the solvent in the material
can be recycled through the condenser, such as the solvent is
water. But it is okay not use the condenser for save cost.
The top adopt arch design, avoid the condensated water droping into
drying chamber, so ensure a high drying efficiency in a low
temperature.
Not only suitable for heat-sensitive material, also apply for the
easy oxidized material. And can use for solvent retrieve, heating
source is hot water steam or heat conducting oil.
It’s batch operation, so can adjust process condition anytime.
It’s operated in static vacuum state, so will not have any damage
for the raw material.
Advantages of Vacuum Drying Machine
1. Under vacuum, the boiling point of the solution of the material
is reduced, so that the heat transfer driving force of the
evaporator is increased.
2. The heat source for evaporation operation can be made of low
pressure steam, waste steam or electric heating tube. (supply
customized hot water or oil, etc. heating source)
3. Less heat loss on evaporator.
4. Suitable for drying heat sensitive materials that easy
decomposition, metamorphic and polymerization under high
temperature.
5. The disinfection can be performed before drying treatment, cause
no any impurities mixed in the drying process, meet the
requirements of GMP.
6. The utility model belongs to a static vacuum drier, so the shape
of the dry material can not be damaged.
Products Show of Vacuum Drying Machine
Application of Vacuum Drying Machine
