Four Doors Circular Vacuum Drying Machine For Battery Electrode
Brief Introduction
This model vacuum oven is equipped with stainless steel liner, independent
relay control and accurate temperature control. Heating vacuum
pumping and nitrogen filling are controlled by buttons. In the
middle, there is one Ø3"×D630mm cantilever shaft which can
withstand 250kg material.
Key Features
• It adopts pneumatic valve, vacuuming and nitrogen filling, which
has high efficiency, saves personnel and has good product
perdormance.
• 4 cylinders design, 5mm thick stainless steel inner tank, strong
corrosion resistance, each one is controlled separated without
affecting each other.
• It adopts 304 stainless steelheating tube coiled liner heating
type, and the temperature is controlled evenly.
• It is sealing with silicone rubber sealing strip, the door is
made of 15mm thick tempered glass.
• The four circular oven is controlled separately, total drying
time, cycle time and vacuum pressure can be set separately
according to customer.
• Elastic double-layer glass door with overpressure protection.
• PID adjustment, small termal inertia, good temperature control
effect.
• The screen system adopts the centralized operation of the touch
screen, which is convenient to operate and reliable to control.
Technical Parameters
| Model | STC-KZK-4D |
| Voltage | AC380V±10%, 50Hz |
| Power | 30KW |
| Temperature | RT~150℃ |
| Inner chamber temp error | ±3℃ (No load in vacuum state) |
| Heating temperature control | Display temperature error within 1°C |
| Inner chamber size | φ450 * D600mm * 4pcs |
| Heating time | The temp rise from RT to 100℃ in no-load state is less than 40
minutes, the oven core temp stabilization time is 110 minutes |
| Vacuum degree | -0.98KPa |
| Vacuum maintaining time | ≥98% for 24 hours at -0.98KPa |
| Surface temperature | During operation, surface temperature ≤ 45°C |
| Drying method | The heating tube surrounds the inner chamber for heating |
| Control method | PLC, relay control |
| Circulating air system | Including circulating air system, which can carry out process
programming and realized automatic control |
| Protection functions | Automatic over-temp alarm;
Power failure automatic protection |
| Dimension | W2050 * D1240 * H2010mm |
| Weight | 1000kg |
Warranty
1 year's warranty with lifetime technical support.
FAQ
1. Are you a manufacture ?
A: Yes,our factory is located in Shenzhen, China. We have more than
10 years experience for manufacturing battery lab research
equipment.
We owns a professional R&D department.
2. Do you accept customized product ?
A: Yes. Most of our products can be customized to meet different
requirments.
3. Will you provide test video before dispatch ?
A: Yes, we take test video for every equipment before dispatchm
which will display how to use it.
4. Can you offer overseas installation service ?
A: Yes, we can dispatch professional engineer for on-site
installion service.
