UK Standard Electrical Wall Switch Metal Panel 2 / 3 / 4 Conjoined Style

Metal Panel 2 / 3 / 4 Conjoined Style UK Standard Electrical Wall Switch

Specifications

Product Features

A. Shell: solid material, anti-stamping, flame retardant and fireproof, high temperature resistance, not easy to change color, long-term use without deformation;
B. Internal conductor of the product: high-quality metal material, wear-resistant, good elasticity, good electrical conductivity, durable, and strong oxidation resistance;
C. Button switch: the life of pressing is over 100,000 times;
D. Quality control: All finished products are 100% electrified before leaving the factory to ensure product quality inspection;
E. Appearance: large metal panel, beautiful appearance;

Description

There are four types of ordinary mechanical switches: one-gang switch, two-gang switch, three-gang switch, and four-gang switch;

Two category: one-way and two-way

One-way switch means that one switch controls one light; two-way means that two switches control the same light at the same time.

For example, there is a "corridor light" switch, and there is also a "corridor light" switch beside the bed. Now we need to control these two "corridor lights" switches in different positions.

For the same lamp, the setting method is as follows:

1. The "corridor light" switch at the door is associated with the "corridor light" switch at the bedside: first turn off the "corridor light" switch at the door, press and hold the "corridor light" button for 20 seconds, the white indicator light of the button will enter a slow flashing state (Flashing 1 time per second), release the hand, the corresponding light will be on (the "corridor light" switch at the door will only turn on when the light control line is connected, and the light will not turn on when the light control line is not connected), all other buttons of the door "corridor light" switch will automatically Turn off the light, the button backlight turns yellow and the pairing request starts. At this time, go to the "corridor light" switch on the bedside and press the "corridor light" button on the bedside (if you press the wrong button, just press the button again to cancel, and then press the correct button) "corridor light" button), The white indicator light of the "corridor light" button enters a slow flashing state, and finally back to the "corridor light" at the door, press the "corridor light" button, then this button and the bedside "corridor light" button indicator will stop flashing and go out . Wait 3 seconds to save the settings. During this period, all switches in the room cannot be operated.

2. The "corridor light" switch at the bedside is associated with the "corridor light" switch at the door: press and hold the "corridor light" button at the bedside for 20 seconds until the button indicator flashes slowly. The rest of the setting methods are the same as point 1, and the 2-way setting is completed.

Functions

1. Connection according to connection diagram

2. Dissemble the frame

3. Dissemble the right and left key cover and expose the hole for fix.

4. Put the screw into the hole and screw in with torque 0.2-0.4N.m (2.0-4.0kgf.cm) fixing the switch

5. Assemble the key cover and frame

No need to dissemble key cover under following condition:

1. Fix hole is exposed out of key cover.

2. Using additional hole to fix

Advantages

(1) Mutual benefit : We are factory also have more than 10 years experience in manufacturing and developing of switches and sockets.

(2) Customize : We have strong R&D team, we will try our best to custom product as your request.

(3) OEM service : (a) Printing your Logo (b) Engraving words or icons

(4) Mix order : We accept mix order, different model and small quantity order.

FAQ

1. Q:What’s the shipping method?

A: By express way. Such as Fedex, DHL, TNT and so on; by air or by sea. Shipping cost is decided by shipping ways and product’s actual weight and volume, also your detailed address.

2. Q:Can we print our own brand or logo on your products?

A: Yes, it is our pleasure to be one your OEM manufacturer in China to meet your OEM requirements.

3. Q: Why do some goods have difference between website picture and practical items?

A: Because difference of light and browser, also different batches, materials may be little difference, such as lining. Sometimes, the picture is for reference only. These are allowed in actual case. If any question, please tell us before order and ask clearly.

4. Q: Can I order one piece for sample or trial order less than MOQ to test the quality?

A: Yes, We recommend to check the sample before order. We accept trial order less than MOQ.

5. Q: If I order big quantity, what's the good price?

A: Please send the details enquiry to us, such as the Item Number, Quantity for each item, Quality request, Logo, Payment Terms, Transport method, Discharge place etc. We will make the accurate quotation to you as soon as possible.

If you have another question, please feel free to contact us.