Automatic bottle spray trigger nozzle capper capping
machine,capping machine for spray, dispenser and lotion pumps
Features
1. Bottle volume: 100ml-1,500ml
2. Speed: 20-100bpm (can be customized based on specific
requirements)
3. Bottles suitable: cylinder, flat and irregular shapes
4. Caps suitable: lotion pump, flip-top, pull-push, Yorker,
disc-top etc.
5. Siemens system
6. Gentle operation, no scratch and injury to caps and containers
7. Quick changeovers
8. Module structure, easy maintenance
9. Easy connected to filling machine and labeling machine
10. Low running noise
Bottle-feeding by screw
The bottle-in screw is processed by contour design, with precise
and fast bottle feeding, no damage to bottle.
Highlight:
Able to deal with press-on or screw-on caps and spray, dispenser
pumps and trigger and suitable for different types of bottles,
whether cylinder, flat or irregular.
1. Working principle: continuous rotary
2. Speed: 200bpm for pumps and 300bpm for screw-on caps
3. Torque control by servo, modify via touch screen
4. Changeover parts in modular design, within 15min
5. Capping efficiency 98%, and pass rate 99.9%
Main components
Bottle in by screw rod, middle templates, capping parts, bottle
out, rejection part, electrical control and cap elevator and
unscrambler etc.
1. Bottle feeding by copying screw
The screw drive follows the main drive, the screw angle can be set
via touch screen to make it match with the star wheel. There is a
sensor at the bottle-in screw, no bottle, no capping and alarm when
bottle-stuck.
2. Cap-feeding by servo chain
Huitui SPI series servo capping machine adopts servo motor for
cap-feeding chain. The servo motor has the advantages of periodic
start and stop, periodic positive and negative rotation, not only
reducing noise and avoid cap-stuck.
3. Cap-dividing
The cap divider is customized by the cap shape and different
diameters would require changeover, but only the white part in the
following pic needs to be changed.
4. Capping by servo motor
Torque controlling-first fast then slow
Closed loop control by the servo motor and program throughout the
capping process
In the process of capping, the servo motor can control the capping
curve movement, and realize digital capping torque control.
5. Different products changing
Made of PP, designed by bottle shape, with smooth surface.
It can not only stabilize the positioning, prevent the bottle from
being scratched; and allows quick changeover.
6. Bottle-fixing(suitable for cylinder bottle)
It’s easy to slip for the cylinder bottle when capping, and the
bottle is soft and easy to scratch. Therefore, the bottle holder
mechanism is adopted. The bottle holder is made of silica gel to
prevent the bottle form from slipping and scratching.
7. Rejecting of unqualified products
The qualified products are normally transported, and the
unqualified ones (no cap, no inner tube, tilted cap-higher than
normal 2mm) will be automatically split to another conveyor by
swing cylinder.
