131Pcs Restoring Damaged Thread Insert Installation Tool M5 M6 M8
M10 M12
Installation tool
1. Bottom hole tap: used for the processing of the internal thread of the wire thread
insert. Since the external thread of the wire thread insert is a
non-standard thread, this type of tap is different in size from the
ordinary M tap.
2. Installation wrench: used to install the wire thread insert in the threaded bottom
hole. The basic principle is to make the wire thread thread
sleeve pass through a section of the guide thread to force the
outer diameter of the wire thread thread sleeve to shrink so that
it can be inserted into the bottom hole smoothly. It is divided
into manual type And automatic type.
3. Breaker: The purpose of the breaker is mainly to break the installation
handle of the wire threaded sleeve, especially for the through
hole, the installation handle must be broken.
4. Sleeve remover: used to take out the threaded screw sleeve installed in the
threaded hole of the base. For the screw sleeve that needs to be
replaced after long-term use, and when it needs to be taken out due
to improper installation or thread tripping during installation,
etc. use.
5. Thread plug gauge: used to detect the internal thread bottom hole of the wire thread
insert. After the wire thread insert is installed, the accuracy of
the internal thread formed depends on the profile manufacturing
tolerance of the wire thread insert and the internal thread bottom
hole of the wire thread insert. tolerance.
Installation inspection
After the wire thread insert is installed, the threaded hole
tolerance zone depends on the profile manufacturing tolerance of
the wire thread insert and the thread tolerance zone of the wire
thread insert mounting hole. The former is controlled by the wire
thread insert manufacturer, and the latter mainly depends on the
tapping of the wire thread insert mounting hole. The wire precision
usually forms 6H grade. When the precision is high, it can reach 5H
and 4H tolerance bands. The unified thread standard is 2B and 3B.
Corresponding level plug gauges can be used to detect the thread of
the bottom hole.
Parameter
| Product name | 131Pcs Thread Repair Insert Kit |
| Material | Carbon steel, high speed steel, stainless steel |
| Color | Natural colour,Red,Blue |
| Application | Auto repair shop, 4S shop, factory / household, personal DIY,
others |
| Product packaging | Iron box |
| Quantity | 131PCS |
| Box size | 38cm*17.2cm*3.7cm |
- Drill out damaged thread using correctly sized drill-bit(supplied)
- Tap re-drilled hole using tap supplied
- Load coiled insert into applicator
- Screw coil into casting
- Using lug breaking tool,break off tang on insert
- Thread is repaired and ready to use
1.How to contact us ?
A:You can send inquiry of our products,it will be replied within 6
hours;And you can contact dirrectly with us through TM or
WhatsApp,Skype as you like.
2.What information should I give to you for inquiry?
A:If you have drawings or samples,pls feel free to send us,and tell
us your special requirements such as material ,tolerance,surface
treatments and the amount you need,ect .
3.What about the delivery day?
A: The delivery date is about 10-15 days after receipt of payment.
4.What about the payment terms?
A: Generally FOB Shenzhen 100% T/T in advance,and we can also
consult accroding to your requirement.
