96 Fibers MPO MTP Optical Patch Panel Enclosure Data Center High
Density Cable System
Quick Details of 1U Fiber Optic Patch Panel
- Max capacity: 96cores
- 24cores MPO cassette, total 4pcs
- Total 48pcs LC duplex coupler
- Sliding patch panel 1U rack with metal drawer
MPO Sliding Drawer Type Fiber optic patch panel are the auxiliary
equipment for data center and high density cabling system, it is
large capacity and small size, good performance. It is 19inch
standard size for rack mount optical distribution frame, suitable
to use LC duplex couplers.
MPO Patch Panel Features
- Standards: IEC / EN 61754-7 (MPO connector) and TIA-568-B.1-7
- Modular connection system: Factory pre terminated optical fiber
connection components, any length and any optical fiber SM & mm,
trunk cable and module box, easy installation, plug and play system
solution
- High density connection system: compact design, 12 core connector,
up to 96 core optical fiber 1U rack mount
- After factory pre termination and testing, the quality assurance
and consistency exceed the demand of 10Gbit
- Made of high quality Cold rolled steel sheet, with electrostatic
spraying
- Metal sliding tray of the splice tray and bottom, easy and fast to
operate without open the cover
- Total front operation with cable clamps and routing area, large
fiber management area
MTP Patch Panel Specification
| Dimension | 482*315*1U mm |
| Max capacity | 96 cores |
| Material | Cold rolled steel SPCC |
| Cable entry port | 4 round port with rubber φ20mm |
| Cable exit port | Lc duplex adapters |
| Adapter quantity | 48 pcs |
| Operating temperature | -10~+85°C |
| Standards | TIA/EIA 568.C, ISO/IEC 11801, ENS50173, IEC60304, IEC61754,
EN297-C, CEA/EIA-310-E, ANSI/TIA/EIA-606-A, GR-449-CORE, RoHS |
| IP Rating | IP20 |
| Color | Black |
mtp mpo cable 12Fiber Optic Connector Specification
| Insertion loss | <0.7dB(standard loss), <0.35dB (Elite loss) |
| Return loss | >65dB APC, >50dB UPC, >30dB PC |
| Mating durability | 500 times |
| Wavelength | 850-1550nm |
| Standards | IEC61300, IEC61754, ROHS, etc |
1U rack mount patch panel, suitable for standard 19inch rack mount
optical districution frame, mounting ears at both sides to fix on
ODF.
This optical fiber enclosure is made colled rolled steel with
spary, black color and with large fiber management area at front
plate.
-----------------------------------------------------------------------------------------------------------------------------------------
Cable entry quantity and the cable diameter can be customzed, all
ports with cable clamps and fixtures internal easy operation.
-----------------------------------------------------------------------------------------------------------------------------------------
This drawr type fiber patch panel is with metal sliding tray at
both sides, easy to operation at front after take whole internal
out, no need to open the top cover.
-----------------------------------------------------------------------------------------------------------------------------------------
1U rack maximum install 4pcs MPO cassettes, each modular 24 fibers
with MPO MTP adapter, MPO LC patch cord and LC adapters.
can use 8fibers, 12fibers or 24fibers MPO on customer request.
-----------------------------------------------------------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------------------------------------------------------
mtp cassette Standard items to configurate
This patch panel can fully load with 8pcs MPO-mpo truck cable, 8pcs
12cores MPO LC patch cable assembly,mpo to lc cable 8pcs MPO MTP adapters, LC duplex coupler 12*4 = 48pcs;
if customer need, pre-terminated cable assembly in factory and pack
them well before delivery.
100% test before delivery, quality assurance.
