Rubber Base Solid Hot Melt Glue Glue Gum For Manufacturing Kraft
Paper Tape
Description
This item is a synthetic rubber based hot melt pressure sensitive
adhesive specifically developed for label applications where good
permanent adhesion is required.
The product is featured excellent tack and peel, good wetting to
substrates and good die-cuttability.
Suggested Use
Permanent labels, and other pressure sensitive applications that
high tack, peel strength and good die-cuttability are required.
Technical Data
| Appearance : | Yellow translucent solid |
| Color (Gardner) : | ≤ G5 |
| Softening Point : | 103 ℃ |
| Viscosity (Brookfield) : | @160 ℃ 12500 cps |
Operating Guides
The material can be applied by slot or roll coating applicators.
Suggested operation temperature is 150 – 1800C for both, depending
on machines, substrates, and plant conditions.
FDA STATUS
The product complies with the FDA Indirect Food Contact Regulation
of 21 CFR 175.105, “Adhesives”.
PACKAGE
6.25kg or 1kg block wrapped with siliconized release paper, or with
meltable film 25kg/box. Please consult the sales representative for
special requirements.
Storage & Shelf life
The intact packing material can be stored indoor for 24 months,
from the date of manufacture, in its original packages under dry
and clean conditions at ambient temperature below 350C and above
50C. Direct sunlight and moisture condensation must be prevented.
Operating precautions
Do not mix with other adhesives to prevent contamination. The
material is applied hot. Appropriate personal protective clothing
and eye protection are strongly recommended to prevent burns.
Adequate ventilation is suggested to remove any vapors or fumes
generated. Rotate stocks and using the oldest stock first.
