SINO 3 Axis LED Digital Readout System DRO SDS6-3V
SDS6 is the best selling series, and SDS6-3V is the 3 axis display
version. That’s an all-purpose DRO, the speed of measurement is
faster, and the control system is easier and smoother.
It employs the newest 16 bits SCM technology, can substitute all
kinds of basic function of different kinds of machine. Like the
high precision coordinate boring machine, floor boring machine,
grinding machine, lathe, EDM, milling machine.
It is allowed to input the high frequency of A/B signals up to
5MHz. Each axis can supply 40 points of non-linear compensations to
increase the accuracy.
Improved Functions:
- Enlarge the calculator function:
SDS6 can change the decimal digits to be three, four or five digits
to improve the calculating precision.
- Non-linear error compensation:
The system has maximum 40 sections non-linear error compensation to
improve the machining precision.
- The numbers of decimal digits can be chosen in inch mode:
4 / 5 decimal digits can be chosen in inch mode. 4 digits can
satisfy long scale requirement, and 5 digits can satisfy high
precisions display.
- Communication:
EDM matching output and RS-232-C interface can be required.
Specifications :
Supply Voltage range: AC 80V~260V; 50~60Hz,US Plug available
Power consumption: 15VA
Operating temperature: 0~45 degrees centigrade
Storage temperature: -30~70 degrees centigrade
Readout allowable input signal: TTL/RS422 square wave
Allowable input signal frequency: Less than 5MHz
Display resolution: 5µm/1µm/0.5µm/0.1µm
Min resolution of digital display angle : 0.0001/pulse
Packaging List :
| 1 PC | 3 Axis LED digital readout SDS6-3V |
| 1 PC | Protection cover |
| 1 PC | Instruction Manual (English) |
| 1 PC | Cable |
Product image /photos:
The rack in the picture is optioned, not standard product.
