LED Liquid Crystal Display Temperature Test Equipment AC380V
50HZ/60HZ
product description:
Climatic chambers Heat-Moisture-Cold combine two types of chambers
Heat-Moisture and Heat-Cold and are a more economical option - "two
in one".
Climatic chamber Heat-Moisture-Cold PRO KTVH-30 / 100-1000 is a
reliable and easy-to-use test equipment for conducting research
both at negative and positive temperatures, allowing to obtain
accurate test results.
It is intended for research and quality control of various
materials, products, components, assemblies, structures,
mechanisms, measuring instruments, etc. associated with temperature
exposure at low temperatures down to -30 ° С and positive up to +
100 ° С and humidity from 10% to 98% at certain temperatures (on
request).
It is used to simulate special operating conditions in laboratories
of radio-electronic, mechanical engineering, food, chemical,
pharmaceutical, etc. industries.
The operating temperature range in the chamber from -30 ° C to +
100 ° C is maintained throughout the volume.
The range of humidity maintenance is from 10% to 98%, at
temperatures from + 10 ° С to + 85 ° С.
| Shock Temperature ragne | -65°C~150°C |
| Heating up time | RT~200°C about 35min |
| Cooling down time | RT~-70°C about 90min |
Temp recover time/
change time | ≤5min / ≤10sec |
| Temp control accuracy/ | ±0.5°C / ±2.0°C |
| distribution accuracy |
| Inner materials | SUS 304# stainless steel plate for inner chamber,and stainless
steel plate |
| + spray painting for external chamber. |
| Insulation materials | High-temperature high-density amino acid ethyl ester foam insulator
material. |
| Systems | P.I.D+S.S.R+Microcomputer balanced temperature control system. |
| Cooling systems | Semi-hermetic two-stage compressor (water-cooled) / |
| hermetic two-stage compressor (air-cooled). |
| Safety devices | Fuse switch, high and low pressure protection switch compressors, |
| refrigerant pressure protection switch failure warning system,
electronic siren. |
| Fitting | Outlook window (special purchase), the upper and lower adjustable |
| compartment two energized measured line hole, casters,level
bracket. |
| Power | 3 phase AC380V 50HZ/60HZ |
| Controller | Tanwan TATO or TH900C |
| Compressor | Germany / Bock Brand |
How a Humidity Chamber Works:
The main components of a humidity chamber are mechanisms that
introduce moisture and heat. There are a variety of methods used to
introduce moisture into the chamber, which can be in the form of a
spray or bath. The same concept applies to heat that is supplied in
the form of coils or heating elements.
In most cases, humidity chambers are designed, manufactured, and
produced to fit the setting that the customer requires. Though
there are many varieties of chambers, the basic components of heat
and moisture are necessary to create the needed humid conditions.
We keep good quality and competitive price to ensure our customers
benefit ; We respect every customer as our friend and we sincerely
do business and make friends with them,no matter where they come
from. Each batch of parts is done quality sampling inspection
before into the warehouse, and Each product before delivery is
tested by the national authoritative third-party inspection agency
Quality assurance:
The equipment is made from high quality materials and components
from leading Russian and European manufacturers. The manufactured
equipment undergoes long-term factory tests without fail, which
allow us to guarantee a higher - in comparison with the closest
competitors - product quality.
Design and development:
We have extensive experience in the design and development of
non-standard equipment according to the customer's specifications.
Industrial (laboratory) drying ovens, laboratory thermostats,
various test climatic chambers, muffle (high-temperature) furnaces
can be made according to your dimensions with a wide variety of
characteristics and parameters.
