Aluminium Stair Nosing Edge Trim Metal Anti Slip Staircase
Protector
Application
Due to their resistance to oxidation, Anodised aluminium stair
nosing profiles enhance indoor and outdoor installations. The
non-slip, ribbed tread profile section is available with a rounded
or squared angle, perfect for retrofitting damaged stairs and
concealing edge imperfections. The profile may be fastened with
flathead screws or appropriate adhesive. This stair nosing profile
is equipped with a slightly rounded edge and grooved top surface.
The carved internal cavity soundly adheres to pre-existing stairs.
Feature
- Manufactured from high-grade aluminium;
- Two glow-in-the-dark strips;
- Ribbed, anti-slip surface;
- Dimensions: 1000 x 35 x 14 mm;
- Thickness: 1.5 - 4 mm;
- Colour: silver;
- Photoluminescence value of 450 mcd. In comparison, toys such as
glow-in-the-dark stars have a photoluminescence value of around 20
mcd;
- Glow duration: 8-12 hours;
- Non-radioactive and non-toxic;
- No power or batteries required;
- Easy to install using adhesive caulk or screws.
Use
Installation
1. Select the profile according to the tile thickness and format
and the subassembly thickness.
2. Using a notched trowel, apply thin-set mortar over the area
where the trapezoid perforated anchoring leg will be placed.Apply
several beads of bonding compound or similar to the back side of
the vertical wall section of the profile.
3. Press the perforated anchoring leg of profile into the thin-set
mortar and align.
4. Trowel additional thin-set mortar over the perforated anchoring
leg to ensure full coverage and support of the tile edges.
5. Solidly embed the tiles so that the tiled surface is flush with
the top of the profile; the profile should not be higher than the
tiled surface, but rather up to approximately 1/32" (1 mm) lower.
6. Set the tile to the integrated joint spacer, which ensures a
uniform joint of 1/16" – 1/8" (1.5 – 3 mm).
7. Fill the joint completely with grout or setting material.
8. Work with materials and tools that will not scratch or damage
sensitive surfaces. Setting materials must be removed immediately,
especially from aluminum.
Specification
| |
| |
| |
| 1. Length: 2.44/ 2.5/ 2.7/ 3m | |
2. Thickness: 0.3mm-3mm |
3. Height: 7/ 8/ 8.3 /8.5 mm |
4. Colour: Silver/ Gold/ Black/ Wood Grain/ Champagne |
5. Type: According to Your Market or Recommend |
| Square/ Round/ Triangle/ Star/ Heart/ Diamond/ Letters |
| Polishing, Anodizing oxidation, Power coating, Electrophoresis |
| Protecting & Decorating the edges of tile, marble, UV board, glass,
ect. |
| ISO9001, SGS, TUV |
