Winlink WNLP84 8 input 4 output DSP Audio speaker management
digital sound processor
Descriptions:
DSP Controller is a Windows-based application, which is used to
conduct configuration and control on DSP hardware.
DSP Controller has 16 built-in presets, and the modules and
sequences for each preset can be flexibly designed in
accordance with the designer's requirements. After the design is
finished, 8 input 4 output DSP Audio speaker
management digital sound processor can be saved for future use. The
sequences and parameters of DSP
Controller's built-in processing modules accord to most of the
application scenarios without any change.
8 input 4 output DSP Audio speaker management digital sound
processor.
Specifications:
Item | Specifications |
Max Input Level | 18dBu |
Max Output Level | 18dBu |
Default Output Level | 0dBu |
THD+N | <0.003%；1kHz@+4dBu
<0.0035%；1kHz@+10dBm
<0.0035%；20Hz～20kHz@+4dBu |
Frequency Response | 20Hz-20kHz, +/-0.2dB |
In To Out dynamic range | 110dB (Unrecorded right) |
S/N | -110dB (Unrecorded right) |
ADC Dynamic Range | CS5361 114dB |
DAC Dynamic Range | CS4382A 114dB |
DSP | 400Mhzfloating - point SHARC ADSP-21488 |
Sampling Frequency | 48K |
QE | 24Bit |
Storage | 32 |
Control Mode | 100M Ethernet |
Language | English |
Noise Gate | Yes |
Feedback | Yes |
Signal Generator | Yes |
Pressure Limiter | Independent 12 channel |
Delay | Output 1-4 218ms
Output 5-8 148ms |
PEQ
Low Shelf
High Shelf | Independent 16-band |
High Pass/Low Pass
Bessel
Butterworth
Link-Riley | Independent 12 channel
-6dB/oct
-12dB/oct
-18dB/oct
-24dB/oct
-36dB/oct
-48dB/oct |
| Product name | 8 input 4 output DSP Audio speaker management digital sound
processor |
3.Typical System Application:
Dante Application: Dante network breaks through space limitations, and has a wide
range of application scenarios.
It can connect all devices that support Dante protocol to the same
local area network. By cascading 2 DSPs,
it supports the access of up to 32 analog microphones and 32 Dante
microphones. Each processor will
conduct first-level auto mixing on its own microphones, and the
second-level auto mixing is then made
on the mixed signal via the auto mixer of main processor so that
more microphones can be connected
to build a larger auto mixing matrix. The two-level auto mixing
working mode can satisfy general application scenarios.
8 input 4 output DSP Audio speaker management digital sound
processor.
