Omron photoelectric switch photoelectric sensor E3z-d62 detection
distance up to 1000mm
product description
The shell of e3Z-D62 photoelectric sensor is made of PBT
semi-crystalline material. It has very good electrical insulation
characteristics and thermal stability, high dielectric strength,
excellent arc resistance, minimal moisture absorption in humid and
high temperature environment, but also can keep the power supply
normal.
Diffuse-reflective, Sensing distance White paper 300 x 300 mm: 1 m,
Light-ON/Dark-ON selectable, NPN, Pre-wired models (2 m), Infrared
LED (860 nm).
- Power supply reverse connection protection
- Reverse connect protection
- Output reverse connection protection
- Output short circuit protection
- Automatic reset
- Built-in mini amplifier
- 1ms fast response
specification
| Brand name | OMRON |
| Model | E3Z-D62 |
| Light source | Infrared LED (860 nm) |
| Power supply voltage | 12 to 24 VDC±10% ripple (p-p) 10% max. |
| Current consumption | 30 mA max. |
| Control output | NPN open collector
26.4 VDC max.
100 mA max.
Residual voltage: 1 V max. (Load current Less than 10 mA)
Residual voltage: 2 V max. (Load current 10 to 100 mA) |
| Operation mode | Light-ON/Dark-ON selectable |
| Protective circuit | Output short-circuit protection, Output reverse polarity
protection, Power supply reverse polarity protection, Mutual
interference prevention |
| Response time | Operate or reset: 1 ms max. |
| Insulation resistance | 20 MΩ min. (500 VDC megger) |
| Dielectric strength | 1000 VAC 50/60 Hz 1 min |
| Degree of protection | IEC: IP67 |
| Material | Case: Polybutylene terephthalate (PBT)
Lens: Denatured Polyarylate |
1. The detection range of the 0 amplifier built-in type reaches the
advanced level.
2. To ensure low temperature performance, can also be used in the
frozen warehouse.
3. Improved consistency of optical and mechanical shafts.
4. can protect the sensor even if wiring error.
5. fully comply with The European RoHS directive.
Operation indicator (orange), Stability indicator (green)
Output short-circuit protection, Output reverse polarity
protection, Power supply reverse polarity protection, Mutual
interference prevention.
The detection distance of OMron photoelectric switch photoelectric
sensor E3Z-D62 reaches the industry level
Antireflection type (red light source type, detection distance of
10m) is equipped with filters to prevent mutual interference.
All kinds of reflective products (2 sets) are equipped with the
function of preventing mutual interference, and also equipped with
the detection distance of 30m (response time 2ms) of the
long-distance antithetical type.
Omron photoelectric switch photoelectric sensor E3Z-D62 improves
the consistency of optical and mechanical shafts.
