Resin Bond Diamond Cup Wheel 150mm For Carbide Grinding Or
Sharpening
Shine Abrasives Resin Bond Diamond Cup Wheel 150mm is suitable for
grinding carbide materials.
Grinding the main edges relief angles of carbide saw blades and all
kinds of carbide tools
Sharpening Carbide Circular saw Blades or other carbide tipped
tools.
Re-Grinding all kinds carbide tools.
The drawing of Shine Abrasives Resin Bond Diamond Cup Wheel 150mm
For Carbide Grinding Or Sharpening
Specifications of Shine Abrasives Resin Bond Diamond Cup Wheel 150mm
For Carbide Grinding Or Sharpening
| Abrasive Material:Diamond | Bond Type:Resin |
| Diamond Rim Size:20x3mm | Diamond Grit:150 grit, |
| Concentration:125% | Wheel Diameter: 6inch 150mm |
| Wheel Thickness:25mm | Wheel Bore: 1-1/4 inch/31.75mm |
| Wheel Type:6A2 Cup | Wheel Weight:1.0kgs/PC |
Question
How to dressing the resin bond super abrasives grinding wheels?
They are usual 2 methods to dressing the resin bond super abrasives
grinding wheels.
1:
Dressing by the white aluminum oxide sticks for CBN wheels,
and silicon carbide sticks for diamond wheels, it's manual as below
picture.
2:
Dressing by a silicon carbide abrasive wheel on a special device
with a centrifugal brake.
Contacting with the grinding wheel, the truing wheel turns, due to
braking, it slips relative to the grinding wheel,
“opening” its working surface and decreasing its run-out at the
same time.
Like blow picture.
The wheels are also dreessing by Diamond dresser sometimes.
