Jekit Car Semimetal Meterial Auto Brake Pad Cp5200 fit for front
| Item Name | Cp5200 brake pads |
| Logo | Custom |
| Material | Semimetal |
| Weight | 3kg |
| Fit disc | 330x32/345X32/355X32/362X32/380X32 |
| For Wheel size | Rim 17/18 |
What do you usually do for brake maintenance?
The items that need to be done for brake maintenance are:
High temperature protection of the car pad;
Lubrication and maintenance of brake cylinder;
Brake disc cleaning;
Brake fluid replacement;
Rust prevention and lubrication of contact surfaces of tire screws,
brake discs and steel rings.
Brake maintenance refers to the inspection and maintenance of the
brake system in a specified period. Its purpose is to slow down and
stop the vehicle. The principle is the energy conversion process of
converting the kinetic energy of the vehicle into heat energy
through friction. The components of the brake system are: brake
pedal, booster, master cylinder, ABS auxiliary, oil pipe, brake
cylinder and friction components of each wheel.
1. High temperature protection of brake pads
Prevent the corrosion of the brake system, prevent the brake pad
from biting due to the high-temperature surface, eliminate the
brake pad scream, and maintain good lubrication durability. The
product with ceramic composition shall be resistant to high
temperature of more than 1400 ℃. Therefore, regularly check the
thickness of brake pads or brake shoes. When it is found that its
thickness is close to or less than the minimum thickness specified
by the manufacturer, it shall be replaced immediately.
2. Lubrication and maintenance of brake cylinder
Lubricate the movable shaft and cup of the brake wheel cylinder,
keep the wheel cylinder bushing soft and prolong the service life
of the wheel cylinder. It is necessary to use fully synthetic brake
wheel cylinder lubricating oil.
3. Brake disc cleaning
Quickly clean the oil stain, dirt and friction dust of the brake
disc, brake drum and any parts to keep the brake disc cool;
Eliminate the harsh noise of braking and promote uniform braking.
4. Brake fluid change
Brake oil has water absorption characteristics. If it is not
replaced for a long time, it will corrode the braking system and
bring hidden dangers to driving. Generally, it is recommended that
the owner replace the brake oil every 20000 km. Mainly to ensure
the cleanliness of brake oil.
5. Rust prevention and lubrication of contact surface between tire
screw, brake disc and steel ring
Prevent corrosion, prevent screws and surfaces from being bitten by
heat, and facilitate disassembly. Aluminum containing products with
high temperature resistance of more than 1100 degrees are required
to ensure the contact area with brake pads and improve braking
force
