TK series HMI storage data export operation instruction
Software:xExpress
xExpress software is specially designed for mView TK series HMI.
The main function is to read the recipe data and record data of the
TK series HMI in operation through the communication port, and save
it as a text file, which is convenient for customers to further
data analysis or make reports, output data can be customized
display format, so that the data display closer to actual use.
Simple operation steps
1. Edit mView software, design HMI program, and define recipe data
or record data.
2. Test the connected HMI program to confirm that is working
properly.
3. Use mView software to export [cache definition export].
4. Open xExpress editor, connect device and communication
parameters.
5. Import data definition (the file exported by step 3).
6.Read the data of HMI buffer area through practice line
7. Select the edited recipe or recorded data, and after editing the
attributes, export the data to a text file.
8.Use Microsoft Excel software to open text documents, and then do
data analysis and reports.
Parameter:
SPECS | Dimension | 275*194*36mm |
| Cutout size | 262*180mm |
Display size | 222*125mm |
Weight | Appox. 0.7 kg |
DISPLAY | Display | 10.1" TFT |
| Resolution | 1024*600 pixels |
Brightness | 300 cd/m² |
Contrast ratio | 400:01:00 |
Backlight | LED |
Backlight time | 60,000 hours |
Display color | 65536 colors |
Touch type | 4-wire resistive panel |
STORAGE | ROM | NOR Flash 16MB |
| RAM | 64MB |
CPU | 32bit CPU 408MHz |
INTERFACE | Download port | Type-B, RS232, RS485 |
| COM port | 1 RS232, 1 RS485 |
Optional | 1 WIFI (occupy default RS485 port) |
Protocol | Support MODBUS, free port and common PLC communication Protocol |
OTHER | Calendar | Yes |
| Input Voltage | 12-24VDC±10%<150mA @ 24VDC |
Consumption | 145mA/24V |
Protection Class | IP65 (front panel) |
Temperature | Ambient environment: 0～50℃ Storage environment: -20～70℃ |
Humidity | 20%～90% RH |
Certification | CE |
Software | CoolMay mView HMI programming software |
TK series HMI applied Coolmay software “mView”. “mView” is a set of
stable and reliable human machine interface programming software
for industrial occasions. Independent and original system design,
running speed increased by 200%, memory usage reduced by 50%.
It supports many communication protocols and can communicate with
more than 200 PLC and controllers on the market.
Program simulation:
mView provides the function of simulating directly on the PC. You
can use this function to simulate the actions performed on HMI
after planning HMI. On the one hand, it increases the convenience
of finding program errors, and on the other hand, it can save
downloading to the time HMI can connect to the controller. The
simulation function of mView is divided into two types: [On-Line
Run] and [Off-Line Run], as shown in the figure below.
