Cement Powder Dense Phase Dust pneumatic conveying System
1. Pneumatic conveying system are relatively economical to install
and operate
2. Pneumatic conveying system are totally enclosed and if required
can operate entirely without moving parts coming into contact with
the conveyed material. Being enclosed there are hygiene &
cleanlinesss benefits
3. A pneumatic conveying system can convey a product to any place
with tubes. its flexible.
4. Pneumatic conveying system offer greatly reduced capital cost
for long distance conveying.
5. PLC full automation
6. Pneumatic Conveying System are much better suitable to powder
handling than mechanical conveyor because the conveyance channels
used in pneumatic conveyors are completely enclosed.
7.Pneumatic conveyors can be designed to move products between
floor levels and around difficult angles.
8. The whole system is composed of compressed air source, pneumatic
vessel, control cabinet,conveying pipe and ash storage.
Product Application
Dense Phase Pneumatic Conveying System uses compressed air or gas
as the medium to transfer the bulk materials with pipe from
position A to position B. It is helpful to production and
environmental protection.
These materials are dry pulverized or free flowing or light powdery
materials like cement, fly ash / aluminium / zinc / calcine /
clinker dust / sand / bentonite / sinter dust, etc. for industries
like Cement / Steel / Paper / Foundry / Chemical / Process, etc.
Product Features
1.Strong power and big conveying quantity
Pneumatic Conveyor has been exported to different countries as
Russia, Saudi Arab, Iran, South Africa, Kenya, Ghana, Philippine,
Thailand, Malaysia, Indonesia, Vietnam, Mexico and so on.
2. Flexible application and grain hanging conveyor
3. Advanced technology and cost-saving
4. Safe and simple installation and commissioning.
5. Simple structure and less&easy maintenance.
6. High efficiency and energy-saving.
7. Easy operation.
Product Paremeter
| Model | DPCS-0.6 |
| Body Inner diameter(mm) | 800 |
| Total volume(M3) | 0.6 |
| Body material | Q235-B |
| Operation Temperature(oC) | <120 |
| Max. design pressure(Mpa) | 0.78 |
| Operation pressure(Mpa) | 0.2-0.5(Basis on the conveying distance) |
| Max. conveying distance(m) | <1000 |
| Outlet conveying diameter | DN80 |
| Air consumption(m3/min) | 3.5-7 |
Product Picture
Contact me
