Stacker Side Cantilever Stacker Stacking equipment for stockyard
The side cantilever stacker is mainly used for stacking limestone,
sandstone, raw coal and other bulk materials. It is mainly used for
storing and blending materials in stockyard. It is mainly
applicated for metallurgy, mining, building materials, chemical
industry, cement and other industries.
The side cantilever stacker has the advantages of simple structure,
reliable performance, easy operation, convenient maintenance and
safe operation.
The side cantilever stacker can stacking operation to different
material pile, and to stack a variety of materials, meet different
stacking processes requirement. The side cantilever stacker was
design as compact, electric-hydraulic driven with automatic
operating function without manpower.
The cantilever beam is the component supporting the cantilever belt
conveyor. It is composed of two I-section main beams and a
horizontal lattice boom. The I-section main beam is a plate welding
structure. The horizontal lattice boom is composed of channel steel
and angle steel. The hinge point at the tail of the cantilever beam
is supported by a sliding bearing and equipped with a lubricating
nozzle
The sied cantilever conveyor runs in one way to meet the needs of
the stacking process. During stacking, the materials are
transferred to the cantilever belt conveyor through the tail end
through the discharge chute, and the cantilever belt conveyor
transports the materials to the stockyard. The cantilever belt
conveyor is mainly composed of a driving device, idler set, roller
set, heavy hammer tensioning device, etc
Specification of Side Cantilever Stacker
| description | parameter | unit |
| material | limestone,sandstone,raw coke | |
| density | 0.8~2.2 | t/m3 |
| granularity | <70 | mm |
| moisture | <2 | % |
| stacking capacity | 100~5000 | t/h |
| rail span | 4~8 | m |
| length of cantilever | 15~40 | m |
| width of belt | 500~1800 | mm |
NOTICES
The customer shall provide the following information when place
order
- character of bulk material;
- Stockyard information;
- Process flow chart;
- Power supply;
- Communication and control requirements.
Applications
Case1
Case2
Photos of our factory
