Miniature Compression Force Sensor 5kN 2kN 1kN 500N 200N 100N 50N
Button Loadcell
Miniature Compression Load Cell FCLB is made of stainless steel based on strain gauge technology
which offers 0-50N / 0-100N / 0-200N / 0-500N / 0-1kN / 0-2kN /
0-5kN seven measuring ranges to choose from,compact design makes Button Load Cell FCLB suitable for compression force measurement applications with
limited mounting space. Each sensor comes with a 4-meter-long
shielded cable, 4xM2.5 threaded holes located on the bottom make it
easy to mount micro force sensor FCLB to a flat platform,you may
find transducer FCLB suitable for applications such as load
distribution analysis, mold pressure measurement, force overload
protection, clamping force measurement, assembly force monitoring,
hydraulics force control and so on.
Specifications
| Capacity | 5kg / 50N / 11 lb 10kg / 100N / 22 lb 20kg / 200N / 44lbf 50kg / 500N / 110lb 100kg / 1kN / 220lb 200kg / 2kN / 440 lb 500kg / 5kN / 1100 lb |
| Rated output | 1.5mV/V |
| Excitation | 3-12V |
| Zero balance | ±0.1mV/V |
| Nonlinearity | ±0.5% R.O. |
| Hysteresis | ±0.5% R.O. |
| Nonrepeatability | ±0.2% R.O. |
| Creep(3min) | ±0.1% R.O. |
| Safe overload | 150% F.S. |
| Ultimate overload | 200% F.S. |
| Compensated temperature | -10...+40oC |
| Operating temperature | -20...+60oC |
| Temperature shift zero | ±0.05% R.O./oC |
| Temperature shift span | ±0.05% R.O./oC |
| Input resistance | 1000±100 ohms |
| Output resistance | 1000±100 ohms |
| Insulation resistance | >5000M ohms |
| Ingress protection | IP65 |
| Material of element | Stainless steel |
| Cable | Ø3*4000mm 4-core shielded cable |
| Wiring code | Red--Excitation+ Black--Excitation- Green--Signal+ White--Signal- |
A Force Sensor is a transducer that converts mechanical load into
mV signal proportional to the applied force.The acting force causes
deformation of the measuring element,the bonded strain gage deforms
accordingly which will cause the resistance change of the
wheatstone bridge,under constant power supply, the output signal
between Sig+ and Sig- will change proportionally,thus the
load/force can be measured by measuring the output signal from the
transducer.
Load cell output: = (Power supply * Rated output) * Load / Capacity
Rated output is normally within 1mV/V~3mV/V.
Power supply is normally within 3-15V.
Load / Capacity is within 0-1.
So the load cell output signal is normally within
0-45mV(-45mV...+45mV for bidirectional load cell).
Example one: Button Load Cell FCLB-1kN with 1.5mV/V sensitivity
powered by 3.3V DC,the output range is 0...+4.95mV.
Example two: Compression Load Cell FCLB-2kN with 1.5mV/V
sensitivity powered by 5V DC,the output range is 0...+7.5mV.
A signal conditioner can be used with the load cell to deliver
-5~5V, 0-10V or 4-20mA output.
Example: FCLB-500N working with amplifier FSC(0-5V)-24V,the
Force-Voltage relationship will be 0-500N force VS 0-5V output,
when you get 3V output,it means the current load is 300N
compression load,when you get 1V output,it means the current load
is 100N compression force,and so on.
Miniature Compression Force Transducer 5kN 2kN 1kN 500N 200N 100N
50N
Click here to download
datasheet
