Street Sweeper Fan Centrifugal Blower China Centrifugal Can
Suppliers
Introduction
The 9-10 series centrifugal fan can output high gas pressure,
suitable for conveying normal or high temperature clean
gas/combustible gas/corrosive gas/mixed with a few impurities,
light particles/debris/short fiber materials.
The most commonly used for forced ventilation, rapid drying, rapid
cooling and heat dissipation, cement production line chiller
cooling, clinker cooler, circulating fluidized bed system, air
purification and industrial waste gas treatment, flue gas
desulfurization industrial boilers or incinerators forced draft/
induced draft/ primary/ secondary air, ventilation of large mill
system, industrial waste heat recovery device, blasting of smelting
furnace and casting furnace, combustion of blast furnace, coal
injection of blast furnace, pressurized transportation of gas,
Pressurization or decompression sealing of industrial equipment.
The 9-08/9-10 series fan is a series of fans that are used in a
large number of industrial fields.
Technical Parameters
| Parameter | Value |
| Type | Induced Draft Fan |
| Pressure | 684-18687Pa |
| Air Volume | 2473-84756m3/h |
| Insulation Class | F |
| Voltage | 380V/50Hz |
| Ambient Temperature | 20℃-500℃ |
| Blade Number | 9-19,7-28,9-26 |
| Blade Type | Backward Curved |
| Speed | 1450-2900rpm |
| Motor | AC Motor |
Advantages and Features
1. It is capable of outputting a higher outlet pressure while
providing more gas flow with lower noise. Stable operation at
higher media temperatures.
2. The fan speed can be flexibly set by matching different pulley
diameters to make the fan run at the highest efficiency point and
reduce energy waste.
3. Motor sliding guides are provided for easy tensioning of the
belt to reduce energy loss due to belt slack.
4. The bearing housing is reserved for temperature and vibration
sensor mounting positions, for convenient to install the fan
operation monitoring device.
5. Use liquid lubricant, it is not necessary to open the bearing
housing to replace and fill the oil. The bearing housing is
provided with an observation window for easy observation of the
quality and stock of the lubricating oil.
6. The bearing housing uses a labyrinth mechanical seal, a unique
Leak proof oil design inside, a vent hole at the top, and a sealant
on the joint, completely eliminating the possibility of oil leakage
in the bearing housing.
7. The impeller is annealed to completely eliminate the internal
stress generated during welding, ensuring that the impeller does
not undergo creep and cracks.
8. The impeller is subjected to a high standard of dynamic balance
correction to ensure stable operation of the fan.
9. After the production is completed, all products are tested for
running and vibration values for reliable operation.
FAQ
1. What parameters need to be provided when you design the Heat
Dissipation Power Plant Blower Fan?
Answers: Air flow, total pressure or static pressure, inlet
temperature, local voltage and frequency, Altitude etc.
If there is flammable and explosive gas, or big dust loading in the
medium, please also inform the designer.
2. How about your company’s pre-sales service and after-sales
service?
Answers: Before our cooperation, we have the professional technical
team to help you make the technical solution according to your
working condition, to make sure the centrifugal fan efficiency
operation.
After sales service, we will offer 12 months’ repairing service,
and provide lifelong follow-up services. Besides, our engineers are
available for going abroad to offer the repairing service.
3. Does your company have qualifications?
Answers: SIMO Blower has obtained ISO 9001-2008, CE, TUV
certifications and so on.
