Custom Stainless Steel 304L Y Type For Chemical Plant Metal
Structured Packing
Metal Structured Packing Introduces:
Wire mesh structured packing has a high specific surface area, and
due to the unique capillary effect of the wire mesh, the surface of
the packing has good wettability, so it has a high separation
efficiency. It has a lower pressure drop and lower liquid holdup
than other packings, making it especially suitable for
difficult-to-separate materials and heat-sensitive systems. The
main materials for making wire mesh packing are stainless steel,
copper, aluminum, iron, nickel, etc., which can be divided into 250
types, 500 types, and 700 types according to the specific surface
area. Since the wire mesh packing belongs to the liquid film mass
transfer type, the key to maintaining high separation efficiency is
to open holes on the corrugated packing sheet or make double-layer
wire mesh packing to enhance the even distribution of liquid on the
wire mesh corrugated sheet especially in the case of low spray
density.
Metal Structured Packing Characteristics:
Advantages
Structured packing offers the following advantages as compared to
the use of random packing and trays:
Lower pressure drop； Higher efficiency (given the same tower
height)； Higher capacity； Reduced liquid hold-up； Structured
packing offers the following disadvantages as compared to the use
of random packing and trays:
Cost Hight； Greater sensitivity to maldistribution
Metal Structured Packing Application
The wire mesh demister is mainly composed of wire mesh, a wire mesh
grid, and a wire mesh block and support for fixing the wire mesh
block.
The device is composed of screens made of gas-liquid filters of
various materials, and the gas-liquid filters are made of metal
wire or
Consists of non-metallic wires. The non-metallic wire of the
gas-liquid filter is twisted from multiple strands of non-metallic
fibers.
It can also be a single non-metallic wire. The wire mesh demister
can not only filter out larger particles suspended in the airflow
Liquid foam, and can filter out small and tiny liquid foam, widely
used in the chemical industry, petroleum, tower system
Gas-liquid separation devices in industries such as manufacturing
and pressure vessels.
Metal Structured Packing Model:
| Type | Specific Area
m2/m3 | Void
m3/m3 | F factor
| Theoretical plate No/m | Pressure drop mmHg/m | | AHS-125X/Y | 125 | 98.5% | 3 | 270 | 94 | | AHS-250X/Y | 250 | 97% | 2.6 | 230 | 96 | | AHS-350X/Y | 350 | 95% | 2 | 150 | 97 | | AHS-450X/Y | 450 | 93% | 1.5 | 120 | 98 | | AHS-500X/Y | 500 | 92% | 1.4 | 87 | 99 |
|
About Us:
Anping County Hardware Mesh Products Co., Ltd. is located in Anping
County, Hebei Province, known as the "Hometown of Chinese Wire
Mesh". The company is a dedicated manufacturer of wire mesh
demisters. The company has more than 90 sets of knitted mesh
equipment. The wire mesh demister is the main product of our
company. Most of our employees are operation, maintenance, and
installation personnel with practical experience, who can provide
customers with the required engineering consultation and
installation of tank filtration. solution.Nearly 20 years of
experience producing mist eliminator mats, knitted wire mesh, and
other packaging materials.
We have ISO9001 certification and a strict quality control system
in the QC department of the enterprise.
We claim that all mist eliminator pads our customers receive are
qualified and perform flawlessly. We have different specifications.
The filtration fineness can reach 3μm~5μm. In addition to standard
and popular sizes, we can also customize specific applications
according to customer needs.
Through continuous on-the-spot inspections, personal exchanges and
cooperation with customers, and comprehensive discounts and
technical support, we have won strong customer support and praise
during the company's development.
The company's performance has maintained an annual output value
growth rate of 30-40. Our employees pursue the policy of
"enterprising, truth-seeking, rigorous and united", continue to
develop and innovate, take technology as the core, and
wholeheartedly provide you with cost-effective products,
high-quality engineering design, and services.
Welcome customer consultation and I sincerely look forward to
cooperating with you!
FAQ:
Q: If I want to know the price, what information should I give you?
A: Material, size, application/purpose, quantity, payment term FOB
or CIF, packaging term, etc.
Q: Is the size fixed?
A: No, except for table size. Can be customized according to
demand!
Q: Can I negotiate the price?
A: Yes, we will give discounts according to the quantity and type
of products you need.
Q: How long is the delivery time?
A: It usually takes 7-10 working days; it depends on the specific
quantity and type.
