automatic ptfe membrane filter grid disposable NYLON PTFE 0.45μm
for Pharmaceutical
Application of folding drinking water
Among MF, UF, NF, and RO, there is no use for RO except for RO for
desalination. RO almost removes all salts. After treatment, the
water becomes pure water without any salt, even purer than
distilled water. Of course, such water cannot be used as drinking
water. If it is used, it is necessary to add salts that are
beneficial to human health. To meet this requirement, there is no
condition to do it. The removal of salt by NF is second only to RO,
but the removal rate is also very high. It is generally used as
soft water, and it is not suitable for drinking water for the above
reasons. Therefore, the membranes used for water purification
treatment should be MF and UF membranes. With such a membrane,
colloids and plankton can be removed, insoluble iron and manganese
can be removed, and fungi can be removed. But in order to prevent
bacteria from regenerating in the clean water tank, the
sterilization process cannot be omitted. Taking into account the
molecular weight of UF removal substances, it is unable to remove
ozone substances and organic solvents such as trihaloethylene.
These solvents will form a thin film on the membrane surface. These
thin films may be removed in the future, which can be listed in the
future. the study. In terms of membrane type, membranes such as
external pressure hollow system or tubular type are suitable for
use. If an external pressure membrane is used, the raw water
passing through the grit tank can be directly connected to the
membrane for treatment. The raw water directly connected to the
plate and frame type and spiral type membranes, in order to prevent
the membrane pores from being blocked, the floating substances in
the raw water should be removed before flowing into the membrane.
Product introduction
The contiguous membrane is a kind of continuous strip-shaped
packaging microporous membrane used in the field of biotechnology
for liquid filtration during the testing process in the
pharmaceutical or beverage industry, CDC, food industry, cosmetics
and chemical industry.
It is specially used with the YT-DS47 automatic membrane taker. It
is triggered by hand induction, and the color code of the
continuous film is positioned. The membrane taker automatically
removes the sterile packaging of the microporous membrane. It is
realized that no manual operation is required, the user's hands are
liberated, and the diaphragm is not in contact with other objects
in the process of being distributed, thereby avoiding the risk of
contamination.
Each box contains 150 filter membranes. The filter membranes are
individually sealed in a special folding tape package. The design
makes the filter membranes easy to open and seal for storage.
Scope of application
◆Pharmaceutical industry: microbial limit inspection of purified
water, water for injection, raw materials and oral liquids,
tablets, capsules, biological products and preparations
◆CDC: Check the total number of colonies in air-conditioning
condensate water, drinking water and other water quality, and
detect pathogenic bacteria
◆Food industry: check the total number of bacterial colonies in
beverages, mineral water and purified water
◆Cosmetics and chemical industry: various water sample inspections
that need to be tested for microorganisms
order information
model
| Diameter
| Aperture
| Material
| Surface
| Packing specification
|
| MC47 | 47mm
| 0.45μm | Mixed cellulose ester (MCE) | Glossy | 600pcs/box |
| MP47 | 47mm
| 0.45μm | Mixed cellulose ester (MCE)/import | Glossy | 600pcs/box |
| MP47B | 47mm
| 0.45μm | Nylon/import | Glossy | 600pcs/box |
| MC47B | 47mm
| 0.45μm | Nylon | Glossy | 600pcs/box |
| MC47A | 47mm
| 0.45μm | Mixed cellulose ester (MCE) | Grille | 600pcs/box |
Technical characteristics
◆Stainless steel body sprayed with plastic treatment, compact size
and beautiful appearance.
◆Powered by lithium-ion battery (up to 11,000 films per charge).
◆It can be connected to the charger and driven by AC power.
◆Automatically distribute filter membrane.
◆Using the optical sensor to take the film, no manual operation is
required to take the film by touching the button.
◆Fast and reliable delivery of the filter membrane, the filter
membrane is delivered by the reel drive technology.
◆The filter membrane is easy to load.
◆Automatic collection of protective packaging.
◆Original color mark positioning technology, accurate detection and
positioning, stable and even parting.
technical parameter
Charging power supply: AC220V/50Hz
Power adapter: AC220V to 12V
Built-in battery: 12V
Power: 2W
Number of sub-films (full power): 11000
Film dividing speed: 1 piece/s
Body size: 23×17×17cm
Weight: 3.5kg
