Portable Cold Cutting Pipe Automatic Beveling Machine Electric Pipe
Cutter
Product Introduction
Bohyar’s electric pipe beveling machine is a lightweight, portable
end prep beveler to produce precise, highly repeatable weld preps,
which is widely used in boiler, pharmaceutical industry and other
areas. It can process various material pipes such as stainless
steel carbon steel, alloy steel under different inner mounted size
from 12.5mm to 240mm.Our BPP pipe beveler is the ideal choice for
various pipe end cutting and beveling.
Industry Application
Our ID mounted pipe beveling machines are applied in pipeline
installation engineering, rush-repair work, heat exchangers, power
plant, nuclear power, petroleum, chemical engineering, natural gas,
pharmacy, pressure vessels etc.
Features
■ Portability: Our BPP series are packed with suitcase, which is
convenient for carrying and allows you to finish processing
outdoors.
■ Quick installation: After being taken out from the suitcase, the
machine will be ready only by positioning it at the center of the
pipe through the ratchet wrench and equipping it with a suitable
cutter. The process will not exceed 3 minutes. The machine will
start to work after pressing down the motor button.
■ Safety and reliability: Through multi-stage deceleration by the
internal bevel gear of the angle grinder, the planetary reducer and
the internal bevel gear of the main shell, the machines can operate
under slow rotating speed while keeping large torque, which makes
the beveled end smooth and flat and in high quality, and extends
the service of the cutter.
Technical Parameters
Product series
Model | Processing range (IDmm) | Wall thickness (mm) | Rated power (kw) | Rotating speed (rpm) |
BPP1E kit1 | 12.5-15 | ≤3 | 1.43 | 3-70 |
BPP1E kit2 | 15-20 | ≤5 | 1.43 | 3-70 |
BPP1E kit3 | 20-28 | ≤6 | 1.43 | 3-70 |
BPP3E/ BPP3P | 26-79 | ≤15 | 1.43 | 3-70 |
BPP3PE | 36-90 | ≤15 | 1.43 | 3-50 |
BPP4E/ BPP4P | 45-105 | ≤20 | 1.43 | 34 |
BPP6E/ BPP6P | 65-159 | ≤20 | 1.43 | 34 |
BPP9E | 80-240 | ≤15 | 1.43 | 16 |
*Electric: Rated voltage of 220V, 50/60Hz
Installation & Processing
■ Measure the inside diameters of the pipe to be processed and
choose a suitable machine and expansion block.
■ Select the appropriate block, place it on the bottom of the
expansion block to ensure the top surface of the expansion block
remain horizontal without any inclination, and rotate the sleeve
anticlockwise to tighten the expansion block and, ensure that the
machine is firmly fixed in the pipeline.
■ Choose a tool with suitable angle listed in the tool table based
on the processing requirements, install it on the cutter head of
the machine and tighten the bolts to fix the tools.
■ Rotate the feed hand wheel and extend the feed spindle Loosen
screw and feed.
■ Stretch the machine expansion mechanism into the pipe, and
reserve sufficient feed space between the tool on the cutter head
and the pipe end face.
■ Rotate the expansion sleeve with the ratchet wrench while
adjusting the position of the machine to ensure the feed spindle
and the center of the pipe is concentric; Tighten nuts on the
expansion sleeve with the ratchet wrench after determining the
position.
■ Start the motor. Rotate the feed handwheel to make the cutting
edge contact with the pipe wall, and then bevel.
Safety Instructions
Safety is our priority when pipe beveling machines are designed,
and ergonomics is also taken into consideration to ensure product
safety and reliability.
■ Operators should read the safety instructions carefully before
operation and properly keep them for reference at any time.
■ Operators should be well aware of the products and fully familiar
with the key points of product operations.
■ Please wear suitable working clothes and safety shoes before
operation.
■ Before operation, ensure the operators are kept away from any
live part such as motors and cables.
■ Operators should be kept away from the rotating cutter head as
far as possible for safety when the machine is working.
■ The machines should be used in clean environment and should not
be used in messy circumstances; if it is necessary to be used in
dusty conditions, please wear masks before operation.
■ For electrical pipe beveling machines, please check whether the
voltage of the power supply is correct; for pneumatic pipe beveling
machines please check whether air pressure and flow of the air
source are correct.
