electric wire cutting machine price New Design
electric wire cutting machine Introduction
Considering the main problems existing in the old type Fast Speed
wire cut machine such as low cutting precision, bad surface
finishing and slow cutting speed, while the brass wire cut machine
is much more expensive and difficult to learn, we develop the
second generation Middle Speed Wire Cutting machine based on the
technology from Brass wire cut machine, deeply improves the cutting
precision, surface finishing (Ra≤0.8um), cutting speed to make the
cutting life and technology almost same as brass wire cut machine.
But the machine's purchase cost is much lower than brass wire cut
machine, the operator who has a little experience of fast speed
wire cut machine can use our machine immediately. Comprehensive
efficiency is 2 or 3 time as fast speed wire cut machine.
We adopt 6 sets high lever linear guide way on the traveling system
including X,Y axis and other running accessories, X,Y axis adopts 2
sets high level ball screw. Wire Swing system: the first company
adopt linear guide way, make the travel move smoothly without any
obstruction, it make sure the swing without any wear, solve the big
obstruction, big wear, etc problem from the V shape guide way.Tape
or Angle part: UV axis tape unit has got national patent, patent
number:2L2008200332261. Perfect design high lever tape unit, make
high accuracy for moving and tape cutting. Wire Tension System:
National patent number: 2L200820000226.7. Adopt double direction
wire tension system, keep the wire tension with same strength
during the working time, which can protect the wire and reduce the
wire broken possibility.
electric wire cutting machine Standard Configuration:
1) Window XP System with Auto-CAD software control System.
2) PANASONIC converter ( Japan Panasonic )
3) "C" Structure HTK Casting Machine Body ( Japan HTK )
4) Standard DRO and Z axis motorized drive up and down.
5) Hiwin brand linear guide way install on XYZUV 5 axis ( P lever )
6) Hiwin brand ball screw install on XYZUV 5 axis ( C3 lever )
7) Automatic center lubrication system. (Not manual )
8) LED Inside light (Not outside bulb)
9) Automatic double direction wire tension system
10) Standard ±6 degree taper cutting system
Cooperate Suppliers:
Linear guide way and ball screw supplier (HINWIN Taiwan)
Bearing supplier (NSK Japan )
Motor, Driver and Electric accessories supplier ( SIEMENS German)
Electric accessories supplier ( NCC Japan )
Transducer (converter) ( PANASONIC Japan)
Servo driver supplier ( YASKAWA Japan )
Handle Remote supplier (EUCHNER German )
Industrial control system supplier (PHILIPS Europe)
electric wire cutting machine Features
1) Machining complex shapes that would otherwise be difficult to
produce with conventional cutting tools.
2) Machining extremely hard material to very close tolerances.
3) Machining very small workpieces where conventional cutting tools
may damage the part from excess cutting tool pressure.
4) There is no direct contact between tool and workpiece. Therefore
delicate sections and weak materials can be machined without any
distortion.
5) A good surface finish can be obtained.
6) Very fine holes can be drilled.
Factory Situation:
1). More than 1500 Sets Wire Cut Machine can be sold out in Chinese
market each year.
2). Over 8000 sets EDM machines installed in China or other
countries.
3). 8 steps checking for each machine by more than 25 QCS.
4). 20 years experience on EDM Machines (From 1997) , 300
employees.
5). 20 research personnel for developing new models or accessories.
electric wire cutting machine Parameters
Item | unit | FR-400G/M/S | FR-500G/M/S | FR-700G/M/S |
Worktable size (L×W) | mm | 550*680 | 580*770 | 720*1040 |
Table travel(X×Y) | mm | 300*400 | 350*500 | 450*700 |
Max. work piece thickness | mm | 250 | 250 | 300 |
U.V axis | mm | 20*20 | 20*20 | 20*20 |
Max. taper angle/plate thickness | degree/mm | ±6°/80mm G model ±12°/80mm M model ±6°/80mm S model |
Motor type | step or servo | G model Step motor M model Step motor S model Servo motor |
Wire diameter | mm | 0.16-0.20 | 0.16-0.20 | 0.16-0.20 |
Machine accuracy | Octagon | mm | ±0.005 | ±0.005 | ±0.005 |
Angle | mm | 0.012 | 0.012 | 0.012 |
Roughness, thrice cutting | um | ≤0.8 | ≤0.8 | ≤0.8 |
Max. machining speed | mm²/min | 200 | 200 | 200 |
Machine dimensions(W×L×H) | mm | 1160*1650*1850 | 1300*1770*1880 | 1730*2020*2080 |
Machine weight | Kg | 1500 | 1700 | 2300 |
Controller dimensions(W×L×H) | Mm | 600*800*1800 | 600*800*1800 | 600*800*1800 |
Wire traveling speed | m/min | 5-11 | 5-11 | 5-11 |
Load of table | Kg | 350 | 400 | 600 |
Rated Power | KVA | 3 | 3 | 3 |
Water tank dimension(W×L×H) | mm | 580*960*660 | 580*960*660 | 580*960*660 |
Working reservoir capacity | L | 150 | 150 | 150 |
