JKY - 150s 50000 Pcs/M Two - Stage Vacuum Extruder Clay Raw
Material Auto Brick Making Machine
1. Product features:
Brick-making machine extrusion pressure, high vacuum, dense mud,
clean appearance. Fully suitable for one yard of combustion process
requirements, high productivity, low water content of molding,
reduce energy consumption and loss in production. It is an ideal
equipment for producing all coal gangue, high volume fly ash, shale
and low quality sand brick.
2 . Techical parameter
| Date | Units of meas | JKY90-4.0 |
| Production capacity | Pieces/h | 40000-55000 |
| Reamer diameter | mm | 750 |
| Pressure | Mpa | 4.0 |
| Moisture content | % | 13～18 |
| Vacuum degree | Mpa | ≤-0.092 |
| Power | kw | 450+200 |
| Size | mm | 11000×3300×3700 |
| Weight | kg | 48000 |
3 . Product Advantage
The Workflow Of Pneumatic Brick Setting Machine :
1, When the cutter pushes the green bricks to the intelligent
seperator , the separator starts work , it drives the separating
board stretch and separate the bricks .
2, When the brick separating is finished , the lift cylinder turns
down .
3, When the chunk reached to the location of the scheduled
blank,Chunk Fixture works in the way of picking up the bricks and
then the chunk is highly lifted by the Lifting Cylinder to a
predetermined height.
4, After all of those progress,then separating cylinder points out
and open the air channel and walking device drives blank stacking
machine to the top of a kiln car,and then lift cylinder dropped
down to the scheduled height for releasing billet,the chunk open
and lay the blanks on the kiln car it complete all the stacking
work.
5, All these functions are centralize control by electric,the
operator simply can achieved operating automatically by starting
the appropriate procedures.
