ZL21 A set of groove filter rod forming machine
Technical parameters
Production Capacity: 110m/min(Acetic Acid Fiber)
70/min(Polypropylene Fiber)
Filter Rod Length: 90～132mm±0.5
Filter Rod Circumstance: 24.2～24.5mm±0.20
Roundness Error: ≤0.35mm
Equipment Power: 8.5KW
Compressed Air: Flow≥0.3m3/min, Pressure≥0.5MPa
Machine Weight: 2850Kg
This machine is mainly used to produce both diacetate fiber filter
rods and polypropylene fiber filter rods and grooved filter rods,
and is applicable to a wide range of raw materials. It has lower
requirements for auxiliary materials and high cost performance
ratio. With seven-vane expansion and shrinkage fabric tape wheel,
it can effectively control the errors in filter-rod length .The
machine has simple construction, steady and reliable performance,
easy to operate and filter rods meet the requirements for
high-speed butting and installing.ZL21 Type fiber filter rod
shaping machine is composed of YL11 opening & gluing machine and
YL21 filter rod shaping machine. It uses diacetate fiber filament
bundle and polypropylene fiber filament bundles as raw materials,
and through such procedures as air opening, screw opening, gluing,
packing and rolling, side sealing, shaping and cutting,
manufactures the filter rods of equal length that comply with the
requirements for butting and installing.
This unit operates in 2-stage air opening and 2-stage screw roller
opening, with good effect in opening. The cigarette pipe is
integral pipe, with good roundness of filter rods. Side sealing is
executed using cornstarch paste and firm bonding is ensured. With
seven-vane expansion and shrinkage fabric tape wheel, it is pliable
to effectively control the errors in filter-rod length. The product
has simple construction, steady and reliable performance, easy to
operate, and filter rods meet the requirements for high-speed
butting and installing.
