SWG Aluminum Hydraulic Busbar Bending Machine Fixed Structure
Function
1. It is designed for bending bus bar in 125mm used in power
generation factory.powertransmission station and copper bus bar and
aluminum bus bar.
2. 2 in l horizontal and erective bending available.lt's really one
machine in two function.
3. The hydraulic cylinder with 35 Ton of outlet force. lt's very
powerful in quick speed and high efficiency.
4. It is made in flip style for easy taking workpiece.
5. The unit body is made from high tough alloy steel. As a
result,it's light weight for carrying conveniently. Bending bus bar
smoothly
6. Ouick coupling for easy load and unload.
7. Standard and assembling;Horizontal bending die:One moveable
die.two errective poles, one adaptor.Erective bending die.one die
frame.two big grip plank.two small grip plank.seven crescent die
plate,two support for erective bending.
structure
1. Working cylinder
2. Rapid connector
3. Side of block
4. Spent on board
5. Under the flower plate
5. Roll column
6. R template
7. Clamp die
8. Right angle die
9. United pole plate
10. Pin
11. Car
12. High pressure pipeline
13. hand pump(electric pump)
Characteristics
The hinge plate is convenient to open and close.
And with scale plate, we can accurately know the bending angle.
Upper and lower plate has been heat treated, so it is firm and
durable, relieve deformation of orifice tension.
Flat, and bend is only need to change the die.
During bending, guide plate is fixed on a plywood mold.
In order to make the the copper and aluminum row in the same plane
while bending,
and make the good surface flatness.
Single oil cylinder design, the tension spring reset, with single
oil pump can work.
Features
1. The dual machine is designed for flat bending and standing of
brass and Al. Curve radian accords with national standard.Smooth
without knit.No wing plate adopts without welding hingle
style.Meanwhile,which is by tempering processing,strong and during,
no breakage and prevent aperture from transformation,switching
convenience.
2.The unique design of curve bending scale 45-90 degrees, a curved
shape.In the field of high precision, lead and find the template
matahing row.Installation qulickly and easliy, engaged in the
personnel with high efficiency, in power line or machine or
maintenance on-site application.exert its powerful efficiency.
Technical Data
| Output force | 25T |
| Rated pressure | 700bar |
| Horizontal bending capacity | Cu /Al 125mm×16mm |
| Vertical bending capacity | Cu /Al 125mm×12mm |
| Pipe bending capacity | Max 3" |
| Weight | 52.5kg |
| Standard dies | One double offset ring spanner (19-inch), hexagon wrench(5mm, 8mm,
10mm) *1, |
| Horizontal bending die*1, vertical bending die base*1, eight sets
of vertical bending dies (40-80x4 40-80x5 40-80x6 40-80x8 40-80x10
100x10 100-125x10 120-125x12) |
| Six support blocks (4, 5, 6, 8, 10,12) |
| One screw, used to connect the oil cylinder |
| 7 sets of bending dies(½ ¾ 1 1½ 2 2½ 3), 2 sets of leaning die ,
one bending middle screw |
| Package | Wooden case |
| Optional dies | horizontal bending tripod, bending die 1¼ |
