PFA squre tube ,PFA Rectangle tube

PFA squre tube, PFA Rectangle tube

Introduction:

PFA shrink tube is made from PFA resin and prepared by the technology of thermoplastic extrusion and blowing. It has non-sticking, heat-resistance, aging resistance, corrosive resistance, non-flammability and good electric property.It can besolid adhesive for PTFE and also a good adhesive for laminating various materials. Its working temperature isup to

260 and is an ideal material for circuit board and flat cable.

Properties :

High low temperature resistance:

-200--260°C,high temperature strength is 2 times higher than PTFE
Good adhesive and heat sealability with PTFE:

Below melting point ,it won’t stick any project.Above melting point, it has perfect adhesive property with PTFE, Metal and self-adhesion(heat sealing).

None stick to water ,oil :water contact angle:θ=115^o
Electric reliability,High dielectric
60HZ-60MHZ,Under the high and low temperature,thepermittivitykeeps2.1even if the surface damaged ,it won’t has conductive track.

Volume resistance>10¹⁸ΩM
Surface resistance>2*10¹³Ω
Voltaic Arc Resistance>165sNo electric leakageWeather resistance:It can be used in sunlight and ozone long
Anti-corrosion:Only in high temperature, Fluorin and alkalis can effect it,others acid,alkali or ester won’t effect it.

Fireproof :If firing, and will still insulate .

High diaphaneity

UL-Resistance :Good penetrability in ultraviolet radiation,and lowest refraction coefficient

Technical index of PFA:

Specification

Dia ø1.5 --300mm, Thickness: 0.015mm to 0.75mm. Length :50mm to unlimited.

For UV lamp T4 T5 T8 T10 T12 , Thickness 0.2 to 0.5mm .

Color and sizes can be customiszed .Surface treated can be done (chemical or plasma treated)

Plastic bag &carton . Customized is acceptable

Everyday new companies open, and companies die.

Most died companies was caused by the founders,including his bad management,his short dream and his attitude to the customers.

Mianyang Prochema Commercial Co.,Ltd. is not an old company,but will be a 100-year company,because his founder has that dream.

Founder himself can not live 100 years,but his spirit and attitude will.

Honest and responsible and insistant are the key points for a company to be existed long enough.

In China,real 100-year company is rare.Hope Mianyang Prochema will the one.

History:

2004--Mianyang Prochema established,initially in insulation and printing plastic film 

2007--Set up Gus Industry(hongkong)co.,limited for global business management

2008--Set up Shenzhen factory to produce the films and involved in conductive film and interactive touch screen

2010--Deeply involved in in-door advertising which is produced from the conductive film

2013--World wide promoting privacy PDLC switchable film and glass

Products and service catalogue:

1.Conductive film

  ITO transparent conductive film

  Copper grid transparent conductive film

  Metal sputtered polycarbonate film

  Touch screen and touch sensors

2.PDLC switchable film and glass,and car solar film

3.Printing film

  Texutred hardcoated PET film

  Printing grade Polycarbonate film

4.Insulation film

  UL V0 polycarbonate film

  UL V0 Polyester film

  General electrical insulation PET film

  Fluoro products and parts

  ETFE film and PVF film

  Perfluorinated ion exchange film

  PVDF PIEZO film and sensors

  Battery barrier film

5.Rugged TFT LCD display module and mainboard

Professional services need the service providers to be professional. Different from many other companies