Underwater stainless steel surface mounted led pool light with DMX
/ WIFI Control
Specification
| Model No. | MS-SSH-RGB-1212 |
| Input Voltage | 12VAC/DC |
| LED Q'ty | 12pcs |
| LED Type | high power (1w/pc) |
| Beam-angle | 30°/45°/60° |
| Rated Power | Red | 9w |
| Green | 12w |
| Blue | 12w |
| White | 12w |
| RGB | 12w |
| Material | stainless steel & transparent PC cover |
| Light Source | RGB/R/G/B/W |
| Control Mode | WIFI/external/switch |
| Luminous Flux (Lm) | Red | 315-385Lm |
| Green | 585-715Lm |
| Blue | 160-195Lm |
| White | 765-935Lm |
| RGB | 340-420Lm |
| Demension | ￠230mm(bottom)x￠135mm(top)x45mm(H) |
| Installation Method | surface-mounting |
| IP Rating | IP68 |
| Warranty | 2-year |
Advantages
1. IP68
2. With high precision assembly to go for IP68
3. RGB color-changing upon synchronous remote control
4. Available for SMD led, high-power led & COB led as the
light-source combination
5. Surface-mounting via screws
6. Over-current protection design
Features
1. IP68 Waterproof (Structure water-proof)
2. Absolute RGB synchronization with patented RGB controller(with
remote)
3. 6 kinds of RGB control method: Remote control, Wi-Fi Control,
DMX Control, Remote & Switch control, Automatic control, External
control.
4. 316 stainless steel lamp body to have the light be able to work
under both fresh water and seawater
5. Transparent PC cover, anti-corrosion, shock-proof, safe
transportation
6. Constant driver to make sure LED light working stably, avoid any
flashing and noisy
7. Voltage:AC/ DC 12V, Frequency: 50/60HZ
8. High quality and brightness LED source
9. Color: RGB, 14 kinds of color changing mode / Single color –
white, red, green, blue, yellow
10. Beam angle: SMD 3528-120°, SMD5050-120°, high power-25°or 30°or
45°or 60°;
11. Life span 50000 hours
12. Over current protection
Application
1) swimming pool / pond
2) waterfall / fountian
3) aquarium / spa
4) garden
Installation Instruction
1. Light should be set 30cm-40cm below the water level
2. The outlet for the conduit should be positioned so that Gland
Adaptor and Attachment Bracket can be positioned well (Use
“Template for Fiberglass Pool Installations” as provided to mark
drill centres).
3. Glass conduit to outside wall of pool before backfilling.
4. Screw Attachment Bracket and Gland Adaptor to wall sealing with
silicone, seal screws with silicone sealant before backfilling.
5. Install light, wind 2 coils of flex around clips to enable easy
removal of Light for servicing. (See the lower left corner).
6. The transformer needs to be installed in an easily accessible
area to allow for servicing when required.
