Inflatable Swimming Pool
Size, Color or Design can be made as you like .
Production time: 3-7 days after get the deposit or depends on the
quantity
Shipping: by sea, by air or by express
Payment term: T/T or Western Union
Usage & Warning:
1. Before use the water pool , make sure the ground is smooth
,without any sharp things in the around area ,because this may lead
to puncture, and cause leak of the pool .if you use the water pool
in a concrete ground ,you need to place a fibrous cloth under the
water pool,
2. Inflate it with an air pump to make sure it is enough air.
3. Then put the water inside the pool until half of the tube of
pool.
Maintenance and Storage:
After you use the water pool, please make it clean and both in side
and outside, and then keep them in a dry place
How to repair the pool?
1. Find out exactly where the leak is. Fill a spray bottle with a
mixture of soap and water and spray it liberally on the water pool
along the seams. You will notice that the solution starts to bubble
up where the leak is located, so take note of the position of the
hole.
2. Prepare the hole for patching. Dry the seam off, and make sure
that it is completely deflated before attempting to patch the seam.
If you have the patch kit that came with the water pool, you can
use the prep solution to thoroughly clean the rubber before
proceeding. Rubbing alcohol also works.
3. Apply plumber's goop liberally to the seam and let it dry for
about 15minutes. If possible, apply some goop to the inside of the
seam as well, so that it spreads out and gives an extra layer of
protection when the water pool pressurizes.
4. Inflate the water pool halfway with air and wait another
30minutes or so to make sure that the goop has dried completely.
5. Inflate the item completely and spray it again with the soap and
water mixture to make sure that the hole is indeed fixed.
