Water Cooling Precision Manual Cutting Machine with Speed 2800rpm
for Various Metals
Technical Data Download: iqualitrol
Cutting Machine XCut-342
Brief Introduction:
iqualitrol XCut-342 Metallographic sample cutting machine is
suitable for cutting various metal, non metal material in order to
observe the metallographic, petrographic structure.
The machine has a cooling device. When using the configured cooling
liquid, the heat may be taken away to avoid overheating. It is easy
for the user to operate the machine. Therefore the machine is one
of the equipments for samples in the factories, scientific research
institution and colleges laboratory.
Technical Specifications:
| Model | XCut-342 |
| Input voltage | AC380V/50HZ/3Ph/4 Wires |
| Motor | 2.4KW |
| Spindle rotation | 2800rpm |
| MAX cutting diameter | Φ60mm |
| Cutting wheel size | Φ250mm x2mm x32mm |
| Dimension | 740mm x620mm x450mm |
| Net weight | 82kg |
Specimen Cutting Machine:
When cutting a specimen from a larger piece of material, care must
be taken to ensure that it is representative of the features found
in the larger sample, or that it contains all the information
required to investigate a feature of interest.
One problem is that preparation of the specimen may change the
microstructure of the material, for example through heating,
chemical attack, or mechanical damage. The amount of damage depends
on the method by which the specimen is cut and the material itself.
Cutting with abrasives may cause a high amount of damage, while the
use of a low-speed diamond saw can lessen the problems. There are
many different cutting methods, although some are used only for
specific specimen types. iqualitrol provides the iCut-864 low speed
diamond saw for cutting OM (optical microscope), SEM (scanning
electron microscope), and even TEM (transmission electron
microscope) specimen.
