QDGY flexible brake hose
Material: EPDM
application: bake system
with stable
safe andreliable braking effects
Be used for transfer pressure for all car's hydraulic brake system.
Exported to U.S., U.K., A.U., Brazil etc..
Size:3.2mm * 10.5mm
Material: EPDM
Application: Brake System
Certificate: DOT SAE J1401,FMVSS106, TS16949 brake hose
OEM : Available
Aftermarket: Available
Working temperature range: -40~+100
Standard:SAE J1401 GB16897-1997 MS263-49
Details:
uses | ID | OD | W.P | B.P | W.T |
In | mm | mm | BAR | PSI | BAR | PSI | g/m |
brake system | 1/8 | 3.2 | 10.5 | 276 | 4000 | 490 | 7100 | 91 |
3/16 | 5 | 13 | 276 | 4000 | 345 | 5000 | 129 |
Test report:
Flex Whip Test | Maintain 1.55-1.72Mpa | 35hr, No Pressure Reduction and Leakage | 80hr |
Ozone Test | 100pphm×70hr×40+3°C,Inspect With 7× Magnifying Glass | No Crack | No Crack |
Cold Bend Test | -45°C~-48°C×72hr,3-5s,bending 180° | No Crack or Rupture | No Crack or Rupture |
Salt Spray Test | 5% NaCl for 24 hr,and Clean With 35°C Water | No Red Rust on Fittings | No Red Rust on Fittings |
Water Aging | Submerge Hose in Water of 85±2°C for 70~72hr under
27.6Mpa×2min;Pressure Rate 172.5±69Mpa/min | Burst Test>49Mpa | Bust Test>90Mpa |
Whip Test>35hr | Whip Test>60hr |
Tensile Test>1446N | Tensile Test>2400N |
Rear Lower Right Side Brake Hose
vw breather hose
sae j30 r6hose
QDGY is a professional producer for brake hoses, and is a leading
manufacturer in China nowWe have certificated ISO9001 & TS16949, and DOT approved. With
advanced R&D lab and strict quality control system, our
products are guaranteed to meet SAE J1401 and FMVSS-106 standards.
Parts No. | Size | Market |
| Burst pressure |
| Length/pc | weight/M |
|
|
|
|
|
|
|
|
GSG111 | 3.2mm X 10.5mm 1/8 HL | OEM |
| ≥75Mpa |
| 10-30m | 100g |
|
|
|
|
|
|
|
|
GSG001AL | 3.2mm X 10.5mm 1/8 HL | OEM & Aftermarket |
| ≥70mpa |
| 10-15m | 99g |
|
|
|
|
|
|
|
|
GSG003AL | 3.2mm X10.5mm 1/8 HL | Aftermarket |
| ≥60Mpa |
| 10-15m | 100g |
|
|
|
|
|
|
|
|
GSG005 | 4.8mm X 12.5mm 3/16" | OEM & Aftermarket |
| ≥60Mpa |
| 6-15m | 150g |
.Every brake hose, brake hose assembly and brake hose end fitting
with which a passenger car, multi-purpose passenger vehicle, truck,
bus, three-wheeled vehicle, motorcycle, trailer, and trailer
converter dolly are equipped shall conform to the requirements of
Technical Standards Document No. 106, Brake Hoses (TSD 106), as
amended from time to time
Brake hose as follows: brake hose, brake oil, hydraulic brake hose,
high pressure pipe, oil brake pipes, hydraulic brake hose,
hydraulic hose, tubing hose, trachea, etc., can also random models
with Toyota, Honda, Mitsubishi, BMW, Audi, Nissan, Opel, etc. in
front. Usages: used in a variety of motorcycles, cars,
multi-functional commercial vehicle, light trucks and other
vehicles hydraulic brake system, hydraulic system for power
transmission. Characteristics: low inflation, anti-burst, high
temperature resistance, ozone resistance, low moisture
permeability, fatigue resistance and excellent pulse performance,
the braking effect is stable, secure and reliable. (1) brake hose
specifications are as follows: 1 / 8 "HL, 3.2 * 10.5mm, 3 / 16" HL,
4.8 * 12.5mm (2) joints: a variety of different shapes, there are
metric thread, the United States and British (3) assembly: the code
can be based on OEM and customer drawings production.
Hose Discription
Rubber Brake Hose Specifications:
| Inner Diameter | Outer Diameter | Outer layer | Double braid | Inner layer |
| 1/8" (3.2mm) | 0.413" (10.5mm) | EPDM | PVA | EPDM |
| 3/16" (4.8mm) | 0.492" (12.5mm) |
Rubb Brake Hose Features:
- Two braid PVA reinforced hose
- Meets FMVSS-106 and SAE J1401 specifications
- Every brake hose pressure tested to 3500 psi( 240 bar or 24Mpa )
- Burst pressure:minimum 7250 psi ( 500 bar or 50Mpa )
- Temperature range -50°C to 121°C
- Compatible with DOT3,DOT4 and DOT4+ brake fluides
Application:
For use in braking system of the vehicle.
Technical Specification:
Test Items | Test Condition | Standard | Test Results |
ID | Normal | 3.2mm | 3.15~3.45mm |
OD | Normal | 10.5mm | 10.30~10.70mm |
Expansion | 1000psi | 0.33cc/ft max. | 0.14~0.16cc/ft |
1500psi | 0.42cc/ft max. | 0.20~0.22cc/ft |
2900psi | 0.61cc/ft max. | 0.41~0.43cc/ft |
Burst | 4000psi×2min;pressure rated 25,000±10,000psi/min | >7000psi No seepage | >10,500psi |
Whip | 235~250psi | >35h | >70h |
Tensile | tensile speed:218±3mm/min | >1446N | 2400N |
Cold Bend | -45°C ~-48°C× 72h, 3-5s,bending180° | No cracking | No cracking |
Ozone | 100pphm×70h×40°C, 7X | No cracking | No cracking |
Impulse | 146°C 1±0.1min at 1600psi+70 | >7000psi No crack | >7500psi |
Compatibility | 120°C × 70h | >7000psi No seepage | >8800psi |
Salt Spray | 5%NaCl, 24h,water cleanout in 35°C | No red rust | No red rust |
Water Aging | Water in 85±2°C,after 70h~72h 4000psi × 2min;pressure rated
25,000±10,000psi/min | >7000psi; >35h; >1446N | >10250psi;>60h; >2200N |
Main Product
---Main Products---
brake hose,brake hose assembly
brake line ,brake line kit
rubber brake hose,fitting,assembly
Teflon/PTFE S.S braided brake hose
Teflon/PTFE S.S braided brake line
Teflon/PTFE S.S braidd brake line kits
Air brake hose,air brake hose assembly
bundy steel tube and assembly
Female & male fitting ,banjo fitting,bolts & nuts.etc
Related matel accessory & rubber accessory
brake hose fittings,male fitting,female fitting,banjo
fittings,banjo bolt,
hose connector and joints
For a quick respon and quotation,kindly tell your OE
Number,quantity,material request in your mail.
Any market request,any logo acceptable ,free sample,leave an
inquiry to know more details about Price,Packing,Shipping and
Discount.
Our Services
---Our Service---:
Sample:
Free samples are available by freight collectwithin 7 days.
Warranty:
1.Quality:All products confirm SAE J1401 standard,and100% teseted before shipping.Safe for user.
2.Guarantee:3 years.Any technical problem will under maintenance.
Market:
Delvery:
Qty/pcs | Delivery Time/day |
500~1,000 | Within 30 days |
1,000~10,000 | Within 15 days |
More than 10,000 | Within 20 days |
Company Information
---COMPANY INFORMATION---
Qingdao Guosong Machinery Parts Co.,Ltdfirst began brake hose & fitting & assembly operations in China in
1996.The premier OEM's rely on the service ,quality and performance
of the brake hose assemblies.QDGY has the capability to design and
provide complete validation testing to the customers requirements.
FAQ
---FAQ---
Q1: Waht kinds of main rubber hose can product?
A: Rubber brake hose,EPDM brake hose,Hydraulic brake hose,Hydraulic
hose,water hose,fuel& oil hose,Brake hose,Stem hose,SAE J1401 brake
hose,DOT 1/8" brake hose,stainless steel braided brake hose,teflon
brake hose,teflon s.s braided brake hose,OE No. brake hose,Flexible
brake hose,Performance competition brake hose...
Q2: What size of brake hose can you supply?
A: common size: 3.2x10.5mm(1/8");4.8x12.5mm(3/16")
Special size: 3.2x11mm...or your request size
Q3: Can you print the words(line) as our requirement?
A: Yes,we do provide embossed and printing marking with different
color ,as your requirement.
Q4: What kinds of fitting can product?
A: All kinds.Female fitting,male fitting,banjo fitting,adepter
brake hose fitting,bolts and nuts,steel with zinc
,chrome,nickle...stainless steel,brass...
Q5: How many types of brake hose do you product?
A: Brake hose,Teflon braided brake hose,PTFE stainless steel
braided brake line,Steel tube,Bundy tube,Steel tube assembly,Brake
hose assembly...
Q6: What is my order's delivery date?
A: It usually takes 5-40 days,which generally depends on your order
quantity and our storage.Details information ,kindly please feel
free to contact with us,or visit our website
www.qdgybrakehose.com,we will reply you within 24 hours.
Contact Us
---CONTACT US---
Best Regards,
Rita He
Sales Manager
empolder(at)qdgybrakehose(dot)com
Qingdao Guosong Machinery Parts Co.,Ltd
#16-1-301 Huada Mansion,
No.6 Yaner Dao RD,266071,
Qingdao China
Tel: +86-532-85779141 Fax: +86-532-85760225
Cell Phone: +86-15066792971
MSN:qdgy_rita(at)hotmail(dot)comSkype: qdgyrita
QDGYis resourceful for brake hose,brake hose fittings and banjo bolts
and nuts ! welcome you to visit ourcompany website or Alibaba homepage !
--------------------------------------------------------------------------------
To supply safety&credit to all the customers
