Proper use of copper cable recycling machine to be selected
depending on the material properties of the model can not only
improve the crushing efficiency, but also to extend the life of the
machine. Using wire cutting blades, blade interchangeability.For
our different lines have different blades of the machine
requirements.
1: Wool thread, strands
When dealing with wool and silk strands require copper meters
machine fixed knife and moving
Sharp knife to make to the broken line is cut blade, so out of the
copper-meter clean high purity.
2: Single stocks, single conductor
When dealing with single stocks, single core cable,
For the knife blade is dull, fixed blade. Under the request of the
moving blade and fixed cutter spacing between lines just stuck
cable for single stock, do not touch the wire core again, at this
point, the cable broken made by inertia cable break, can
effectively avoid the production of copper clad.
Testing of copper cable recycling machine
For the first time using the device, please complete the following
measures:
1. Before starting the cleaning machine should be expected to check
the installation screen is normal, so no-load start.
2. Check the wire line is really well.
3. Turn on the butten.
4. Pull the strat butten than seee the machine wether workde well
if not please try to remove the oil butten.
5. After you have finished all the steps, you can start the machine
Activate or deactivate the crusher
1)Start of production of copper meters machine
In order to start at boot time: Suction hair → vibration mill
Interval of one minute each action operations. (In the order of the
boot sequence from right to left).Wait for the device to start
completely start feeding. According to the material circumstances
rotary airlock knob to adjust to the ideal state
2)Turn off the copper-meter production line
In order to close the crusher suction → shock hair, every action
one minute interval operation. (From left to right in turn shut
down).
3)Emergency Stop
In case of emergency, you should press the red emergency stop
button, if you want to start the device again, the emergency stop
button clockwise to reset it.
