Perkins 50KW / 63KVA Home Diesel Generator , Diesel Powered
Generator
Detailed Product Description
Perkins 50KW / 63KVA Silent Diesel Generator Home Use Generator Set
Genset Data: 400/230V, 50Hz, 3 Phase 4 Pole, 1500RPM, Power Factor 0.8.
SHX Soundproof Generator Set Features:
- A new kind of acoustic material is used as pugging, noise reducing
return-flow wind tunnel is used as generator set's ventilation
system.
- High efficiency silencer with double level structure and another
silencer between two levels keep the noise at the lowest level.
- The box is modular structure with indicator and maintenance doors
which make installation, operation and maintenance very convenient.
- Benefited from the special design,medium low noise diesel generator
set's noise can be as low as 70dB (A) (at LP7m).
- Fuel tank can be installed on it according to customer needs.
Technical Specifications:
| Genset model | SPE63 |
| Genset rated power | 50KW/62.5KVA |
| Rated voltage | 230/400V (adjustable) |
| Rated current | 90 Amp |
| Frequency | 50 Hz |
| Power factor | 0.8 Lagging |
| Connecting type | 3 phase 4 wire |
| Cooling system | Closed cycle water-cooled with fan, water tank |
| Overall dimension (L×W×H) mm | 2600×1000×1400 |
| Gross weight (kg) | 1200 |
| Diesel Engine |
| Brand | PERKINS |
| Model | 1104A-44TG1 |
| Engine structure | 4 cylinders vertical in line,4 stroke, turbocharged |
| Rotating speed | 1500 RPM |
| Engine cooling method | Water-cooled |
| Speed governing system | Mechanic speed governor |
| Starting method | By 12V batteries |
| Engine filter system | Dry type air filter ,fuel filter, oil filter, water filter |
| Displacement(L) | 4.4 |
| Bore×Stroke(mm) | 105×127 |
| Compression ratio | 17.25: 1 |
| 100% Load fuel consumption (litre/h) | ≤12.2 |
| Lube capacity(L) | 8 |
| Alternator |
| Brand | ENGGA |
| Model | EG225-50N |
| Excite type | Brushless self-excited AVR regulation |
| Connecting type | 3 phase 4 pole |
| Steady frequency change | 0.50% |
| No load voltage | ≥95%-105% |
| Steady voltage | ≤±1% |
| Insulation class | Class H |
| Protection grade | IP21 |
INSPECTION AND TEST
1 GENERAL
1.1 Each engine shall be tested at manufacturer’s workshop to
certify the engine output and fuel consumption in accordance with
the site operating condition specified by purchaser on the
specification datasheet.
1.2 All relevant information drawings pertinent to the testing and
test procedure shall be transmitted to the purchaser in advance of
the test date notification.
1.3 The purchaser shall call for additional testing if test results
are unsatisfactory or marginal. Any equipment rejected shall be
repaired or replaced to the purchaser’s satisfaction and tests
shall be repeated.
1.4 Any unsatisfactory material, equipment, installation, or
workmanship shall be replaced or repaired to the purchasers
satisfaction at the manufacturers cost.
1.5 The engine and generator shall be tested individually in
accordance with relevant standards specified above.
1.6 The completed and individually tested engine and generator
shall be assembled onto the base plate with all auxiliaries,
instruments and controls for a complete test of the generator set.
Introduction of Diesel Generator:
A Diesel Generator (DG) is a combination of diesel engine with
electrical generator (often called an alternator) to generate
electricity. DG sets are used in places that have no connection to
power grid, and as emergency power-supply if the grid fails. In
other words, DG sets remain the number one choice for standby and
emergency power systems. DG sets are selected based on the
electrical load they are intended to supply.
