Cisco ASA 5500 Series Network Firewall 5505 Edition Bundles
ASA5505-50-BUN-K9
Description:ASA 5505 Appliance with SW, 50 Users, 8 ports, 3DES/AES
Cisco ASA 5500 Series Adaptive Security Appliances
ASA5505-50-BUN-K9 is easy-to-deploy solutions that integrate
world-class firewall, Unified Communications (voice/video)
security, SSL and IPsec VPN, intrusion prevention (IPS), and
content security services in a flexible, modular product family.
Designed as a key component of the Cisco Self-Defending Network,
the Cisco ASA 5500 Series provides intelligent threat defense and
secure communications services that stop attacks before they impact
business continuity. Designed to protect networks of all sizes, the
Cisco ASA 5500 Series enables organizations to lower their overall
deployment and operations costs while delivering comprehensive
multilayer security.
Quick Specs
Table 1 shows the Quick Specs.
Product Code | ASA5505-UL-BUN-K9 |
Maximum firewall throughput (Mbps) | 150 |
Expansion I/O | Not available |
Integrated Network Ports | 8-port Fast Ethernet switch (including 2 PoE ports) |
Minimum system flash: | 64 MB |
Memory | 256 MB |
Power | AC/DC |
Dimensions (H x W x D) | 4.45 x 20.04 x 17.45 cm |
Package Weight | 1.8Kg |
Rack or Wall Mounting the Cisco ASA 5505
Warning To prevent bodily injury when mounting or servicing this
unit in a rack, you must take special precautions to ensure that
the system remains stable. The following guidelines are provided to
ensure your safety: This unit should be mounted at the bottom of
the rack if it is the only unit in the rack. When mounting this
unit in a partially filled rack, load the rack from the bottom to
the top with the heaviest component at the bottom of the rack. If
the rack is provided with stabilizing devices, install the
stabilizers before mounting or servicing the unit in the rack.
Statement 1006
The following information can help plan equipment rack
installation:
Allow clearance around the rack for maintenance.
If the rack contains stabilizing devices, install the stabilizers
prior to mounting or servicing the unit in the rack.
When mounting a device in an enclosed rack, ensure adequate
ventilation. Do not overcrowd an enclosed rack. Make sure that the
rack is not congested, because each unit generates heat.
When mounting a device in an open rack, make sure that the rack
frame does not block the intake or exhaust ports.
If the rack contains only one unit, mount the unit at the bottom of
the rack.
If the rack is partially filled, load the rack from the bottom to
the top, with the heaviest component at the bottom of the rack.
Wall-Mounting the Chassis
To wall-mount the chassis, perform the following steps:
Step 1 Choose a wall where you would like to mount the adaptive
security appliance.
Step 2 Using the wall-mounting bracket as a template, use a pencil
to mark the location for the four plastic anchors, used to secure
the adaptive security appliance to the wall. Make sure all the
pencil marks are located in the center as shown in Figure 3-10.
Figure 3-3 Wall-Mounting Bracket
① | M3 x 12 screws | ③ | Plastic anchors for vertical mounting (optional) |
② | Plastic anchors | |
Figure 3-4 Removing and Replacing the Screws
Figure 3-5 Mounting the Cisco ASA 5505 Chassis
Step 10 Connect the interface cables.
Our Advantage
1. Extensive Real Inventory
2. Save up 50%-99% off the Global Price list
3. Flexible payment shipment
4. Unparalleled Experience Service
Shipping:
1. Fast: in 2-3 days upon receipt of payment.
2. Safe: original package with protection foam in case of equipment
broken in transportation.
3. Economic: Low cost express fee via DHL, Fedex, TNT,EMS,Postal etc.
4. Flexible: We also ship to your Assigned Forwarder or Pickup by
your forwarder.
