2600W Ultrasonic Plastic Welder 1 Year Warranty, Digital ultrasonic
welding machine 15khz
2600W ultrasonic plastic welding equipment / sonic welding
equipment
Ultrasonic wave acting on the contact surface of the plastic, it
will produce tens of thousands of times per second vibration, this
is to achieve a certain amplitude of high-frequency vibration,
through the upper and welded parts of the ultrasonic energy
transmitted to the welding area, due to the welding area that two
welding interface at the interface, so it will produce a high
temperature. Also because of poor thermal conductivity, can not be
distributed in a timely manner, gathered in the welding area,
resulting in the rapid melting of the contact surface of the two
plastic, coupled with a certain pressure, so that their integration
into one. When the ultrasonic stop action, let the pressure last
for a few seconds, so that the solidification of the formation, so
that a solid molecular chain, to achieve the purpose of welding,
welding strength can be close to the original material strength.
Ultrasonic plastic welding depends on the amplitude of the
transducer horn, the added pressure and welding time etc. three
factors, welding time and welding pressure can be adjusted, the
amplitude by the transducer and amplitude. Bar decision. The three
interaction with appropriate value, energy exceeds the optimum
value, the amount of plastic melting is big, welding material easy
to deformation; if the energy is small, it is not easy to be
welded, the pressure also should not be too large. The optimal
pressure is the best pressure welding part of the side length of
1mm and the edge of each product.
Characteristic:
1. Intelligent Digital Autotune- Provides fully-automatic tuning.
2. Weld by time, energy, peak power, multiple welding mode.
3. Available in 4 frequencies – 15 Khz, 20 Khz 35 KHz and 40 KHz.
4. Increased power levels.
5. Amplitude Stepping for optimization of weld strength and
appearance.
6. Built-in digital amplitude control - for fine tuning of critical
applications
7. Various welding modes providing maximum flexibility, A range of
welding modes enable
optimum ultrasonic processing of plastic parts.
8. Quick application changeover, high welding seam strength.
9. Suitable for high cadences and short cycle times.
10. Systems Protection Monitor (SPM) Five levels of power supply
protection are provided:
1) phasing, 2) over voltage, 3) over current, 4) over temperature,
5) power.
Applications:
Ultrasonic welding machine is widely used in automotive industry,
electronic industry, medical industry, household appliances, woven
apparel, office supplies, packaging industry, toy industry, and so
on.
Why choose us:
1,Certificate:CE, FCC,ROHS,ISO9001.
2,Technical support: All our products adopt advanced technology,
produce product with advanced system, all worker are experienced
and skillful.
3,Products warranty:One year quality assurance and after service
support
4,Quantity guarantee: All products will have been strictly quality
inspected before packing.
| Type | Power(W) | Frequency (KHz) |
| ARS-SLHJ-1500W15 | 1500W | 15KHZ |
| ARS-SLHJ-1500W20 | 1500W | 20KHZ |
| ARS-SLHJ-1800W15 | 1800W | 15KHZ |
| ARS-SLHJ-1800W20 | 1800W | 20KHZ |
| ARS-SLHJ-2000W15 | 2000W | 15KHZ |
| ARS-SLHJ-2600W15 | 2600W | 15KHZ |
| ARS-SLHJ-2600W20 | 2600W | 20KHZ |
| ARS-SLHJ-3200W15 | 3200W | 15KHZ |
| ARS-SLHJ-4200W15 | 4200W | 15KHZ |
2600W ultrasonic plastic welding equipment / sonic welding
equipment
2600W Ultrasonic Plastic Welder 1 Year Warranty, Digital ultrasonic
welding machine 15khz
