Laboratory Electronic Computer Control Servo Universal Testing
Machine
Application:
This machine adopts computer control and widely used in rubber,
plastics, wires and cables, textiles, waterproof materials,
non-woven fabrics and other non-metallic materials, as well as
mechanical properties testing of metal wires, metal foils, metal
plates, and metal bars. Applicable to a variety of finished product
stretching, compression, peeling, shearing, tearing, bending
(folding) test together with various fixtures. It could print many
data, according to different data to make a graphical output
comparison, high control accuracy, and easy operation; it’s
designed by modular, all kinds of accessories are complete and
flexible.
This machine is mainly used for testing mechanical properties of
metal such as tensile, compression, bending, etc. It can also
achieve constant stress, constant strain, creep, relaxation, axial,
radial and other kinds of dead-end cycle tests. According to GB,
JIS, ASTM, DIN and other standards automatically determine the
tensile strength, yield strength, elongation, constant elongation
stress, constant stress elongation, elastic modulus and other
parameters.
Control Software:
Language: Simplified Chinese/English
Force unit: N, KN, Kgf, Lbf, Length Unit: mm, cm, in
Control method:
Computer software set speed, set load break (breakage), running
time and other control methods
Manual operation box: convenient for calibration and positioning
when holding the test sample
Automatic determination of material breakage, crushing, etc. and
automatic shutdown, can be set automatically return
Curve type:
Load - Displacement, Load - Time, Displacement - Time
Stress - Strain, Strain - Time, Stress - Time.
Curve vertical and horizontal coordinates can be set arbitrarily.
Available test data:
Maximum strength, minimum strength, fracture value, up and down
yield strength, tensile strength, compressive strength, elastic
modulus, elongation, maximum, minimum, average value of the
stripping interval. (Customers need to order before selection)
With overload, over-current, over-voltage, under-voltage,
over-speed, travel and other multiple protection.
The data results are derived from the current national standard
crystal report format.
Specifications:
Capacity: 3000kg, 3T, 30KN
Accuracy: 0.5, test force accuracy is better than ± 0.5%,
Load sensing: high precision tension transducer (can be equipped
with multiple sensors at the same time)
High resolution: 1/300000
Magnification: 24 bits AD Magnification
Unit: N, kN
Test speed range: 0.001~500 mm/min stepless speed regulation
Speed control accuracy: ±0.5%
Displacement resolution: 0.001mm
Test effective width: Standard type: 400 mm (or customized
according to customer requirements)
Test stroke (including fixtures): Standard type: 800 mm (or
customized according to customer requirements)
Overload setting protection function: automatic shutdown protection
when the set test force exceeds 10%
Stroke setting protection function: set protect upper and lower
stroke positions.
Power Servo Motor: Tamagawa Servo & Servo Drive Controller
Power consumption: 0.4kVA
Power supply: 1ø, 220 VAC, 50/60 Hz
Volume: 76x60x210 cm (WxDxH)
Weight: 400 kg
Standard accessories: tension clamps, tools, manual, warranty
Punctuation extension meter
- Non-metallic large deformation device
2. Small deformation (scale length: 25, 50, 100mm)
Accessories and configuration:
1, test machine host 1 set
1.1 American force high-precision load sensor 1pcs
1.2 Japan Tamagawa servomotor 1 set
1.3 Taiwan City State Deceleration System 1 set
1.4 Taiwan TBI precision screw 1 set
1.5 Mitsubishi synchronous belt wheel 1 set
1.6 Jianmei aluminum professional shield 1 set
2. WindowsXP operating system & test software 1 set
3. Haier brand computer 1
4. Color inkjet printer 1
5. Stretching, compression attachment 1 set
6. Tools (to provide installation, maintenance, operation of the
special tools required) 1 set
7. Technical information (operating instructions, warranty card,
certificate) 1 set
