High-frequency Carbon & Sulfur Determinator
HARDWARE FEATURES:
1. Integrated infrastructure including high frequency combustion
device and infrared detecting systems
2. Hewlett-Packard desktop computer, liquid crystal display and
laser printer
3. With carbon monoxide compensation, the analytical results are
more accurate
4. Standard metal connectors ensure the tightness of gas system.
Japan SMC valves support continuous analysis of more than 100000
samples.
5. Unique gas route reverse-purge design enables continuous
analysis of more than 1000 samples without cleaning furnace part.
6. Two sets of carbon detecting systems provide wide analytical
range of carbon.
7. High precision Digital Mass Flow Controller can eliminate the
influence of outside factors such as temperature, pressure and so
on. Moreover its accuracy and stability are better than the
Variable Flow Meter.
8. Infrared detection device is characterized by the integrated
design of optoelectronic, exquisite and durable structure with its
reliability and stability reaching to level J standard.
9. Swiss modulating motor can keep continually working 30,000 hours
without any mistake.
10. Ultra-micropore stainless steel metal dust filter which can be
used for a long time with its excellent characteristics including
anti-corrosion and no need to clean
When the sample burns in the high-frequency induction furnace, the
carbon and sulfur included in the sample will be oxidized to CO2
and SO2, which will be sent to infrared detector with O2 as the
carrier.The electronic signal produced by the infrared detector
will be delivered to monitor for data processing after
amplification. The analytical results will be displayed then and
the percentage of carbon and sulfur contents will be printed out
through printer.
DESCRIPTION:
CS-902G high-frequency infrared carbon/sulfur determiantor adopts
an integration infrastructure of high frequency combustion part and
infrared analysis part, with four sets of detecting systems high
carbon, low carbon, sulfur, carbon monoxide equipped.
P/N:
RSD CS-902G
NEW CERAMICS LIGHT SOURCES:
High efficiency, low temperature, long lifetime;
Good spectral characteristics and no attenuate for long wave.
INFRARED MODULATING MOTOR:
1. Swiss modulating motor can keep continually working 30,000 hours
without any mistake.
2. Precision frequency dividers and drivers with high-power MOSFET
provide stable and reliable work.
SPECIFICATIONS:
Carbon:
1. C1: 0.001 - 50%(Can be extended to 100%)
2. C2: 0.00001% - 0.5%
3. RSD £ 0.4%
4. Sensitivity:0.1ppm
5. Meet ISO9556 requirement
Sulfur:
1. S1: 0.1% - 60%(Can be expanded to 100%)
2. S2: 0.00001% - 5%
3. RSD £ 1.0%
4. Sensitivity:0.1ppm
5. Meet ISO4935 requirement
Analysis samples:
Steel,Ferroalloy,Nonferrous Metal,Ore,Coke,Raw Material and
Slag,Rare Earth etc.
INFRARED CARBON/SULFUR ABSORPTION DEVICES
Integrated design of optoelectronic, exquisite and durable
structure;
Laser welds components, which ensure the tightness of gas system;
Preamp adopts special integrated circuit, enabling reliability and
stability reaching to level J standard.
WARRANTY:
1 Years after receiving the goods
