Reverse circulation performance tooling used to collect rock
samples quickly and efficiently for Rotary Drilling
Reverse circulation performance tooling used to collect rock
samples quickly and efficiently for Rotary Drilling
REVERSE CIRCULATION PERFORMANCE TOOLING
Reverse circulation (RC) drilling is used to collect rock samples
quickly and efficiently using a large rotary drill and air
compressor. The higher penetration rate and lower cost per meter of
RC drilling make it ideal for obtaining mineral samples in the
early phases of an exploration project.
REVERSE CIRCULATION DRILLING
Reverse circulation (RC) drilling uses a dual-walled drill rod with
a cutting tool, typically a pneumatic reciprocating hammer, to
produce a bore hole in a rock formation and to retrieve rock chips
and cuttings from the bottom of the hole. Reverse circulation is
achieved by blowing air down the rods in the annulus between the
inner and outer tube, causing differential pressure that creates
lift for cuttings that travel up the inner tube to the surface. RC
drilling has proven itself as a fast and economical means to
collect mineral samples and has grown in popularity since its
introduction in Germany in the 1960s.
SWIVELS
Used in either pure RC drilling or conventional Down The Hole (DTH)
methods, Roschen swivels are a cost effective alternative to
conventional top and bottom swivel operation; and with only one set
of connections, they provide additional safety benefits and lower
maintenance requirements.
RC DRILL STRING
The RC drill string is designed to deliver high pressure and high
volume air to the cutting tool at the bottom of the bore hole. Once
a drill rig is selected, subs and adaptors make it possible to
connect a drill string to the drill head, in many different
combinations depending on the choice of tools used.
FEATURES:
Reverse Circulation Drilling Rods
Roschen offers drill rods with Faber, Matrix, Metzke, and Remet
type threads for complete compatibility with all systems. Our
robust drill pipe provides 360° of contact from inner tube collar
to outer tube and is designed to be easily replaced in the field,
minimizing costly downtime.
Faber
Faber-type thread is one of the recognized standard threads used in
reverse circulation drilling. Roschen Faber-type drill pipe
features high-grade alloy tool joints with heat treated pins for
superior resistance to damage, high strength precision mid-bodies
for long life and ease of assembly, and field replaceable inner
tube assemblies. Faber type thread uses a four threads per inch
design.
Matrix
Matrix-type thread is another recognized standard in RC drilling.
Roschen Matrix-type drill pipe features high-grade alloy tool
joints with heat treated pins for superior resistance to damage,
high strength precision mid-bodies for long life and ease of
assembly. In Matrix type rod, the inner tube can be fixed with
rubber stabilizers or field replaceable with steel stabilizers.
Matrix-type RC pipe features sealing o-rings on the pin portion of
the inner tube assembly, providing optimal inner tube sealing and
airflow. Matrix-type thread uses a coarser, more durable three
threads per inch design.
Metzke
Metzke-type thread is one of the recognized standard threads used
in reverse circulation drilling. Roschen Metzke-type drill pipe
features high-grade alloy tool joints with heat treated pins for
superior resistance to damage, high strength precision midbodies,
for long life and ease of assembly, and field replaceable inner
tube assemblies with special joints that offer 360-degree
stabilization with minimal flow restriction. Metzke-type thread
uses a four threads per inch design and more robust 90° tool joint
mating surface.
Remet
Remet-type thread is another recognized standard in RC drilling.
Roschen Remet-type drill pipe features high-grade alloy tool joints
with heat treated pins for superior resistance to damage, high
strength precision midbodies, for long life and ease of assembly,
and field replaceable inner tube assemblies with special joints
offer 360-degree stabilization with minimal flow restriction.
Remet-type RC pipe features sealing o-rings on the pin portion of
the inner tube assembly, providing optimal inner tube sealing and
airflow. Remet-type thread uses a coarser, more durable three
threads per inch design.
| REVERSE CIRCULATION DRILL ROD SPECIFICATIONS |
| Thread Type | Remet | Remet | Remet | Metzke | Metzke | Matrix | Matrix |
| Rod O.D. | 3 1/2" | 4" | 4 1/2" | 4" | 4 1/2" | 4" | 4 1/2" |
| Outer Tube O.D. | 88.9mm | 101.7mm | 114.3mm | 101.7mm | 114.3mm | 101.7mm | 114.3mm |
| Outer Tube I.D. | 81.8mm | 94.6mm | 107.2mm | 94.6mm | 107.2mm | 94.6mm | 107.2mm |
| Outer Tube W.T. | 5.3mm | 7.1mm | 7.1mm | 7.1mm | 7.1mm | 7.1mm | 7.1mm |
| Inner Tube O.D. | 38.1mm | 50.8mm | 63.5mm | 50.8mm | 63.5mm | 50.8mm | 63.5mm |
| Inner Tube I.D. | 32.6mm | 45.3mm | 58mm | 45.3mm | 58mm | 45.3mm | 58mm |
| Inner Tube W.T. | 5.5mm | 5.5mm | 5.5mm | 5.5mm | 5.5mm | 5.5mm | 5.5mm |
| Spanner Flat | 90mm | 90mm | 90mm | 90mm | 90mm | 90mm | 90mm |
| Weight 3.0m | 75kg. | 75kg. | 95kg. | 75kg. | 95kg. | 75kg. | 95kg. |
| Weight 6.0m | 120kg. | 150kg. | 168kg. | 150kg. | 168kg. | 150kg. | 168kg. |
Keywords:
Reverse Circulation RC Drilling Rods
Reverse Circulation Drilling Rods
Reverse Circulation Drilling Rod
Reverse Circulation drill rigs
Reverse Circulation drill rigs for sale
Reverse Circulation drill rigs for sale used
reverse circulation drilling process
reverse circulation hammer
reverse circulation well drilling
reverse circulation drilling method
reverse circulation swivel
reverse circulation drilling rigs
Reverse Circulation Drill Rods
Reverse Circulation Drill Rod
Reverse Circulation Drill Rigs
Reverse Circulation Drill Rigs for sale
Reverse Circulation Drill Rigs for sale used
dual tube reverse circulation drilling
reverse circulation drilling process
reverse circulation drill pipe
what is reverse circulation drilling
matrix drill pipe
reverse circulation bits
dual wall reverse circulation drilling
reverse air drilling
Reverse Circulation RC Drill Rods
Reverse Circulation RC Drilling Rods
Reverse circulation rods - Technidrill
Reverse Circulation Drill Rods and Pipe
Related searches for Reverse Circulation Drill Rods
dual tube reverse circulation drilling
reverse circulation drilling process
reverse circulation drill pipe
what is reverse circulation drilling
matrix drill pipe
reverse circulation bits
dual wall reverse circulation drilling
reverse air drilling
Dual Tube Drill Rod
Reverse Circulation Drilling
Dual Tube Drill Rod for Reverse Circulation Drilling for sale
Premium Reverse Circulation Drilling Pipes
Reverse Circulation Drilling Pipe, reverse circulation pipe,
Reverse Circulation Well Drilling Pipe, rc drilling pipe, drilling
pipe, drilling rod, dual tube drilling pipe
Reverse Circulation Performance Tooling
Reverse Circulation Drill Rods 4 in OD
Reverse Circulation Pipe
Reverse Circulation Drilling
Reverse Circulation
Reverse Circulation Drilling with Patented Grout Through
Reverse Circulation Drilling Programs
Reverse Circulation (RC) Drilling
Reverse Circulation rods
Reverse Circulation rotary drilling
reverse circulation swivel
what is reverse circulation drilling
dual tube reverse circulation drilling
reverse circulation drill pipe
Reverse circulation drill rod/drill pipe for sale
Reverse Circulation Dual Tube Drill Rod Surface RC Tool Joint End
For more information, please contact:
ROSCHEN INC.
ROSCHEN GROUP LIMITED
ROSCHEN HOLDINGS LIMITED
Skype: ROSCHEN.TOOL , ROSCHEN_GROUP
WeChat: +86-137 6419 5009 ; +86-135 8585 5390
WhatsApp: +86-137 6419 5009 ; +86-135 8585 5390
Email: roschen@roschen.com ; roschen@roschen.net
Website: http://www.roschen.com ; http://www.roschen.net
http://www.roschen.cn ; http://www.roschendrill.com
http://www.roschenmining.com ; http://www.roschendrilling.com
