Wear Resistant Ceramic Liner / Ceramic Lining for Petroleum
Machinery
Tag key words : ceramic liner ceramic lining
Ceramic liners have better performance than metal liners in wear
proof , corrossion resistant and service life .
The material of ceramic liner is the most advanced international
increased flexible zirconium . As per this material , the tenacity
breakpoint is K10-15MPA( 10 times of the ordinary material )
Bending strength is 600-800mpa with weber coefficient is m18 and
modulus of elasity of E200 mpa .
| Item: | Zirconia Ceramic Liner | Product Name: | Zirconia Ceramic Liner & Ceramic Sleeve For Pump |
| Descriptions: | Zirconia ceramic liner, ceramic sleeve for pump
80mm diameter
1.Wear resistant
2.Corrosion resisting
Used in pump
High density
Low thermal conductivity.
Chemical inertness
Resistance to molten metals
Ionic electrical conduction
Wear resistance
High fracture toughness
High hardness
Zirconia ceramic are used in shaft , plunger, high-Pressure
cleaning machines. sealing structure, auto mobile Industrial, oil
drilling equipment, Insulation parts in electrical equipment ,
ceramic knife, ceramic hair clipper spare parts, with high density,
bending strength and breaking tenacity.
We can supply the products according to customer's drawings,
samples and performance requirement. |
Mingrui Ceramic Factory is a professional Ceramic Liner Manufacturer , We are producing vavious custom Zirconia Ceramic Liner ceramic sleeve for pump which is high temperature resistant tubes .
Zirconia Ceramic liner Ceramic Sleeve for pump have exceptional hardness and strength, resistance to chemical
attack and wear, low dielectric loss and excellent electrical
insulation properties. Additionally, Alumina can be metallized for
brazing to other metals, highly polished, and comes in a variety of
purities depending on it use. Due to these outstanding properties
ceramic Alumina tubes are used in a wide range of industrial and
advanced applications.
Zirconia Ceramic Liner Ceramic Sleeve for pump exhibits high hardness, good abrasion resistance, high strength,
and stability. These products are developed incorporating
sophisticated technology and are made available to patrons at
market leading prices.
Zirconia Ceramic Liner ceramic sleeve for pump is a unique advanced ceramic. Products manufactured from alumina
ceramic exhibit superior mechanical properties such as high strength and flexibility. Heat insulating properties and oxygen-ion conductivity indicate zirconia has potential for use
in a wide variety of applications - everything from
telecommunications to the new energy of the future and
environmentally beneficial products.
Depending on doping material different material properties could be
achieved because of influencing the Yttria's microstructure. The
"Ceramic Steel" titled Zirconia is doped with Yttria forming an
ultra-fine ductile structure with sub-micron grain formation
leading to enormous bending strengths. Magnesia doped qualities are
less strong also showing a coarser microstructure.
Advantages of Zirconia Ceramic Liners ceramic sleeve for pump :
1). Excellent insulation, security, long working life.
2). High temperature resistance
3). Resistance to electric breakdown
4). Stand wear and tear
5). High strength
6). Corrosion resistance
7). Good compactness
8). HIgh hardness
Zirconia Ceramic liner ceramic sleeve for pump :
| Available grades |
Zirconium liner
|
ID range
| 0.5 - 200 mm |
| OD range | 0.8- 200mm
|
| Length | 0.5- 400 mm
|
ID tolerance
| ±0.002 mm |
More related photos of ceramic lining :
Industrial Alumina Ceramic Intriduction
Aluminium Oxide Ceramic tube , Al2O3 is the most widely applied and
cost effective technical ceramic material. It offers a combination
of superior mechanical strength and electrical properties, wear
resistance and corrosion resistance. The maximum working
temperature is up to 1700 °C with relatively high thermal
conductivity. It is also an electrically insulating material with a
high electrical resistivity. The good corrosion resistance makes it
insoluble in water and slightly soluble in strong acid and alkaline
solution.
Company Introduction
Mingrui ceramic manufacture and provides alumina ceramic components
for a wide range of application like Mechanical Equipment,
Electronic & Electrical, Oil Drilling, Medical, Chemical Industry
etc. According to actual application and customer's requirement,
the purities vary from 95%-99.7% and the forming methods will be
different. The forming methods applied in our plant include dry
pressing, isostatic pressing, injection moulding, extrusion
moulding. With experienced engineers and talented workers, we are
confident to offer high quality, high precision, complex components
for customers worldwide.
FAQ
Q: Are you trading company or manufacturer ?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is
15-20 days if the goods are not in stock, it is according to
quantity.
Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample for free charge but do not pay
the cost of freight.
Q: What is your terms of payment ?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30%
T/T in advance ,balance before shippment.
If you have any other question, pls feel free to contact us .
More related products:
Catalogue :
