Flash Memory IC Chip
ADS114S06IPBS 16-Bit Delta-Sigma ADC 2.7V to 5.25V 280μA Low Power
Precision 16-bit ADC with low power consumption down to 280 μA. Features programmable gain up to 128, internal 2.5V reference, and SPI interface. Ideal for industrial sensor transmitters and PLC modules. Operating temperature range -50°C to +125°C.
ADS1112IDGSR 16-Bit ADC 240SPS 2-Ch Differential I2C Data Converter IC
Precision 16-bit ADC with 240SPS, 2 differential or 3 single-ended channels. Features onboard reference, PGA, and I2C interface. Low power 240μA, 2.7V-5.5V supply. Ideal for portable instrumentation and industrial control.
ADS1015 12-Bit ADC I2C Analog to Digital Converter 2V to 5.5V 3300 SPS
Precision 12-bit ADC with I2C interface, low power 150μA, and wide supply range 2.0V to 5.5V. Features programmable data rate up to 3.3kSPS, internal reference, and ultra-small X2QFN package. Ideal for portable instrumentation and battery monitoring.
ADC122S021CIMM/NOPB 12-Bit 2-Ch 50-200ksps Analog-to-Digital Converter IC
Low-power CMOS 12-bit ADC with two input channels and 50-200ksps sample rate. Features 2.2mW power consumption at 3V, SPI-compatible serial interface, and industrial temp range. Ideal for portable systems and data acquisition.
ADC108S022CIMTX/NOPB 10-Bit ADC 8-Channel 50-200kSPS SPI TSSOP-16
Low-power 10-bit ADC with 8 input channels and 50-200kSPS conversion rate. Features SPI/QSPI/MICROWIRE interface, independent analog/digital supplies, and power-down mode. Ideal for automotive, medical, and portable systems. Industrial temp range -40°C to +105°C.
ADF7012BRUZ RF Transmitter IC 75MHz-1GHz ISM Band FSK GFSK OOK GOOK ASK
Low power UHF transmitter for short-range devices. Supports 75MHz to 1GHz, programmable output power -16dBm to +14dBm, and data rates up to 179.2kbps. Ideal for wireless metering, remote controls, and security systems.
ADE7858AACPZ-RL Polyphase Energy Metering IC 3-Phase 0.1% Accuracy 40-LFCSP
High accuracy 3-phase energy measurement IC with 0.1% typical error over 1000:1 dynamic range. Supports IEC 62053 standards, SPI/I2C interfaces, and battery mode antitampering. Ideal for industrial polyphase meters.
AD7730BRUZ-REEL7 24-Bit ADC CMOS Data Converter IC with 2 Analog Input Channels
High-resolution 24-bit ADC with 230,000 counts peak-to-peak and ultra-low drift. Features programmable gain, on-chip DAC for TARE removal, and >150 dB line frequency rejection. Ideal for weigh scales and pressure measurement. Available in 24-lead TSSOP.
AD7712ARZ-REEL 24-Bit ADC CMOS Data Converter IC with 2 Analog Input Channels
High-precision 24-bit sigma-delta ADC with 2 analog input channels, programmable gain (1 to 128), and low power consumption (25 mW). Ideal for process control, smart transmitters, and portable instruments. Features self-calibration and bidirectional serial interface.
DAC5571IDBVR 8 Bit I2C DAC Converter IC 2.7V to 5.5V SOT23-6
Low-power 8-bit buffered voltage output DAC with I2C interface up to 3.4 Mbps. Features rail-to-rail output, power-on reset to zero, and micropower operation at 125 μA. Ideal for process control and portable instrumentation.
ADC128S102CIMTX/NOPB 12-Bit ADC 8-Channel 500ksps-1Msps SPI TSSOP-16
Low-power 12-bit analog-to-digital converter with 8 input channels, 500 ksps to 1 MSPS throughput. Features SPI/QSPI/MICROWIRE/DSP interface, independent analog (2.7V-5.25V) and digital supplies, and power-down mode. Ideal for automotive, medical, and portable systems. Industrial temp range -40°C to +105°C.
AD5660ARJZ-2500RL7 16-Bit DAC IC with 5 ppm/°C On-Chip Reference SOT-23
Low power 16-bit nanoDAC with on-chip 1.25V/2.5V 5 ppm/°C reference. Guaranteed monotonic, rail-to-rail output, 10 µs settling. Ideal for process control and portable instruments. Available in SOT-23 package.
AD5422AREZ-REEL 16-Bit Single Channel DAC IC Current Source Voltage Output 4-20mA
Precision 16-bit DAC with programmable current (4-20mA, 0-24mA) and voltage outputs (0-10V, ±10V). Features ±0.01% FSR TUE, on-chip reference, fault detection, and SPI interface. Ideal for PLC and process controls. Available in TSSOP and LFCSP packages.
TSC2046IPWR Touch Screen Controller 4-Wire 2.2V to 5.25V SPI Interface IC
The TSC2046IPWR is a 4-wire touch screen controller with low-voltage digital I/O from 1.5V to 5.25V. Features include internal 2.5V reference, battery measurement up to 6V, and SPI interface. Ideal for PDAs, POS terminals, and portable instruments. Exceeds IEC 61000-4-2 ESD standards.
AD5667RBRMZ Dual 16-Bit DAC IC with 2.5V On-Chip Reference 5 ppm/C MSOP-10
Low power dual 16-bit nano DAC with 2.5V on-chip reference (5 ppm/°C). Operates from 2.7V to 5.5V supply. I2C interface supports up to 3.4 MHz. Guaranteed monotonic, power-on reset to zero. Ideal for process control and portable instruments.
AD5662ARJZ-2REEL7 16-Bit DAC IC 2.7V-5.5V SOT-23-8 Low Power
Low power 16-bit digital-to-analog converter with 2.7V-5.5V supply range. Features rail-to-rail output, power-on reset to midscale, and 480 nA power-down mode. Qualified for automotive applications. Ideal for process control and portable instruments.
AD7792BRUZ-REEL 16-Bit Sigma-Delta ADC 3-Channel Low Noise Low Power IC
Low power 16-bit Σ-Δ ADC with 3 differential inputs, on-chip in-amp and reference. RMS noise down to 40 nV at 4.17 Hz. Supply 2.7V–5.25V, 400 μA typical. Ideal for thermocouple, RTD, and industrial process control. 16-lead TSSOP package.
TPS61169DCKR LED Driver IC Boost Converter 38V 1.2A 2.7-5.5V Input SC70-5
TPS61169 is a high-efficiency boost LED driver with integrated 40V 1.8A MOSFET. Drives up to 38V LED strings. Features PWM brightness control, open LED protection, and 1.2MHz switching frequency. Ideal for smartphone, tablet, and portable device backlighting. Available in compact SC70-5 package.
TLV5627IPW 8-Bit Quad DAC IC Serial Interface 2.7V to 5.5V TSSOP-16
Four-channel 8-bit voltage output DAC with flexible 4-wire serial interface. Features rail-to-rail output, programmable settling time, and power-down mode. Supports dual supplies (3V/5V). Ideal for battery-based applications. Available in TSSOP-16 package.
TLV5627IPW 8-Bit Quad Serial DAC Data Converter IC 2.7V to 5.5V
High-performance 8-bit quad serial DAC with low power consumption and wide voltage range. Ideal for industrial control and automation. RoHS compliant and available in custom packaging for OEMs.