Flash Memory IC Chip
BQ24297RGER Power Path Management IC Switch Mode 3A Charger VQFN-24
Highly integrated switch-mode battery charger for 1-cell Li-Ion/polymer batteries. Features 90% efficiency, I2C control, USB OTG, NVDC power path, and ±0.5% voltage accuracy. Ideal for smartphones and tablets.
BQ24166RGER Lithium Ion Battery Power Path Management IC 2.5A Charge Rate
High-efficiency switch mode charger with separate power path control for instant system startup from deeply discharged batteries. Supports dual inputs up to 2.5A, 0.5% regulation accuracy, and thermal protection. Ideal for portable devices.
TPS51200DRCR DDR Termination Regulator 2.5V 3.3V Input Sink Source 20uF Output Capacitance
The TPS51200DRCR is a sink and source DDR termination regulator supporting DDR to DDR4. Features fast transient response, remote sensing, PGOOD, and EN. Requires only 20-μF output capacitance. Green Pb-free 10-pin VSON package. Ideal for servers, telecom, and base stations.
LM60CIM3X NOPB HVAC Temperature Sensor -40 to 125C 6.25 mV/C SOT-23
Precision integrated-circuit temperature sensor for HVAC systems. Rated -40C to +125C with ±2C accuracy at 25C. Linear 6.25 mV/C output, 2.7V to 10V supply, low 110 μA current drain. Available in SOT-23 and TO-92 packages.
LMV225SD/NOPB LMV225URX/NOPB RF Power Detector IC 450-2000 MHz 30 dB Range
30 dB RF power detector for CDMA/WCDMA, 450 MHz to 2 GHz. Accurate temperature compensation, 0.2V-2V output, 2.7V-5.5V supply. Available in DSBGA and WSON packages. Ideal for PA modules and RF power control.
CC2500RGPR 2.4 GHz Low Power RF Transceiver IC for ISM Band Wireless Applications
The CC2500RGPR is a low-cost, low-power 2.4 GHz RF transceiver IC for ISM/SRD band systems. It features high sensitivity (-104 dBm), low current consumption (13.3 mA RX), and programmable output up to +1 dBm. Ideal for wireless audio, game controllers, and remote controls.
HCPL-3760-000E Logic Output Optocoupler AC DC Input 3750 Vac Isolation
The HCPL-3760-000E is a low-current threshold detection optocoupler with AC/DC input and logic compatible output. Features programmable sense voltage, hysteresis, and 3750 Vac isolation. Ideal for limit switch sensing, voltage detection, and microprocessor interfacing. UL and CSA approved.
Broadcom HCPL-2601-500E High Speed Optocoupler 10MBd 5mA 8-Pin DIP
High speed optocoupler with 10MBd data rate and 5mA low input current. Features 15kV/μs common mode rejection, TTL compatibility, and UL/CSA safety approvals. Ideal for isolated line receivers and digital isolation.
HCPL-2430-500E High Speed Optocoupler 20MBd 2Ch 4mA 3750Vrms Isolation
High speed optocoupler with 40 MBd data rate, 3750 Vrms isolation, and low 4mA input. Features totem pole output, Schmitt trigger, and TTL compatibility. Ideal for logic isolation, switching power supplies, and bus drivers.
Broadcom BCM5461SA1KPFG Gigabit Ethernet Transceiver 10/100/1000BASE-T 0.13um CMOS
Fully integrated Gigabit Ethernet transceiver compliant with IEEE 802.3 standards. Features low power under 700mW per port, cable diagnostic, jumbo packet support up to 9KB, and multiple MAC interfaces. Ideal for industrial networking equipment.
BCM5221A4KPTG Ethernet IC Single PHY RMII MII 2.5V 3.3V 64-Pin TQFP
Low-power Fast Ethernet transceiver with integrated voltage regulator, HP Auto-MDIX, and cable diagnostics. Supports MII/RMII, industrial temp range, and RoHS options. Ideal for servers, LOM, IP phones, and embedded systems.
ACPL-021L-500E High Speed Optocoupler 5MBd Surface Mount IC
High speed optocoupler with 5MBd data rate and surface mount package. Offers reliable isolation, consistent performance, and no change in fit, form, or function. Ideal for industrial and communication applications.
ACNV260E-300E High Speed Optocoupler 10MBd 2mm DTI Integrated Circuit
High speed optocoupler with 10MBd data rate and 2mm DTI. Compliant with EN60079-11 ATEX and IECEx. Features 20kV/μs CMR, 5000Vrms isolation, and wide temperature range -40°C to +105°C. Ideal for industrial power isolation and intrinsic safety circuits.
ACNT-H61L-500E High Speed Optocoupler 10MBd 15mm Stretched SO-8 7500Vrms
Ultra-low power 2mA optocoupler with 10MBd speed and 20kV/μs CMR. Supports 3.3V/5V over -40°C to +105°C. UL/CSA/IEC certified for reinforced insulation. Ideal for 690VAC drives, inverters, and medical equipment.
Broadcom 6N137-000E High Speed Optocoupler 10 Mb/s 3750Vrms DIP-8
High speed optocoupler with 10 Mb/s data rate and 3750Vrms isolation. Features 15 kV/μs common mode rejection, TTL compatibility, and wide -40°C to +85°C operating range. Ideal for isolated line receivers and digital isolation.
6N136-500E High Speed Optocoupler 1 Mb/s 3750Vrms DIP-8
High speed optocoupler with 1 Mb/s data rate and 3750Vrms isolation. TTL compatible, open collector output. Ideal for high voltage insulation, video signal isolation, and replacing pulse transformers. Available in DIP, SO-8, and widebody packages.
CC3200R1M2RGCR CC3220RM2ARGKT RF Integrated Circuits SoC 80MHz ARM Cortex-M4 QFN
Industry-first Wi-Fi CERTIFIED single-chip MCU with built-in Wi-Fi connectivity for IoT. Integrates ARM Cortex-M4 at 80MHz, supports Station/AP/Wi-Fi Direct modes, WPA2 security, and hibernate mode with
CC1150RGVR CC115LRGPR RF Transmitter IC for Low Power Wireless 315-915MHz ISM Bands
True single-chip UHF transmitter for ultra-low power wireless applications. Supports 315/433/868/915 MHz ISM/SRD bands with configurable data rate up to 500 kBaud. Integrated baseband modulator, 64-byte FIFO, and SPI control. Ideal for AMR, RKE, and consumer electronics.
CC1125RHBR RF Transceiver IC 2V to 3.6V 164-960MHz Narrowband Low Power
High-performance single-chip RF transceiver for ISM/SRD bands. Features excellent sensitivity down to -129 dBm, low current consumption (17 mA RX), and 128-byte FIFOs. Supports seamless CC1190 integration for extended range. Ideal for smart grid and wireless metering.
CC1310F128RHBR Sub-1 GHz Wireless MCU 128KB Flash 48MHz ARM Cortex-M3
Ultra-low-power Sub-1 GHz wireless MCU with 128KB flash, 20KB SRAM, and 48MHz ARM Cortex-M3. Ideal for IoT, home automation, and industrial monitoring. Supports 433/868/915 MHz ISM bands with excellent battery life.