Flash Memory IC Chip
TLV62080DSGR TLV62084DSGR 1.2A High Efficiency Synchronous Step Down Converter 2.5V to 6V Input
High efficiency synchronous buck converter with 1.2A output current. Features DCS-Control architecture for fast transient response, 100% duty cycle for low dropout, and power save mode for light load efficiency. Available in 2mm x 2mm WSON package. Ideal for battery-powered devices and point-of-load regulation.
TLV61224DCKR 3V Step-Up Boost Converter IC 0.7V to 3V Input 400mA Switch SC-70
High-efficiency synchronous boost converter for single/dual-cell alkaline or Li-primary batteries. Delivers over 40mA from 1.2V input with 94% efficiency. Features pass-through, enable pin, and overvoltage protection in compact 2mm x 2mm SC-70 package.
TLV61220DBVR Low Input Voltage Step-Up Converter 0.7V to 5.5V 200mA SOT-23-6
High-efficiency step-up converter with up to 95% efficiency and 5.5μA quiescent current. Operates from 0.7V to 5.5V input, supports startup at 0.7V. Features output overvoltage, overtemperature, and UVLO protection. Ideal for battery-powered, solar, and portable medical devices. Available in thin SOT-23-6 package.
TLV431ACDBVR TLV431ACDBZR TLV431AIDBVR Low Voltage Adjustable Shunt Voltage Reference 1.24V to 6V
Low voltage adjustable shunt voltage reference with 1.24V reference and 0.25Ω output impedance. Supports output from VREF to 6V. Ideal for SMPS feedback, Zener replacement, and voltage monitoring. Available in ultra-small SC-70 and SOT-23 packages.
TLV431ACDBVR TLV431ACDBZR TLV431AIDBVR Low Voltage Adjustable Shunt Voltage Reference IC
Precision low voltage adjustable shunt reference with 1.24V to 18V output range. Features low dynamic impedance, high accuracy, and wide operating temperature. Ideal for power path management and voltage regulation in industrial applications.
TPS53318DQPR 8A Synchronous Step Down Switching Voltage Regulator 1.5V to 22V Input
High efficiency 8A synchronous switcher with integrated MOSFETs. Features 1.5V to 22V input range, D-CAP mode fast transient response, selectable frequency, and auto-skip Eco-mode. Ideal for servers and telecom infrastructure.
TPS53219ARGTR Synchronous Step Down Controller 3V to 28V Input 16 Pin QFN
Wide input voltage range 3V to 28V, output 0.6V to 5.5V. Features D-CAP mode control, Eco-Mode for light load efficiency, and selectable soft start. Ideal for servers and embedded computing. Available in 3mm x 3mm QFN package.
TPS53015DGSR Synchronous Buck Controller 4.5V to 28V Input 500kHz D-CAP2 Mode
The TPS53015 is a single adaptive on-time D-CAP2 mode synchronous buck controller supporting 4.5V to 28V input and 0.77V to 7V output. Features fast transient response, no external compensation, Eco-Mode for light load efficiency, and comprehensive protections. Ideal for digital TV, STB, and gaming consoles.
TPS51716RUKR DDR Memory Power Management IC Synchronous Buck Controller 2A LDO 3mm x 3mm
Integrated DDR2/3/4 memory power solution with synchronous buck controller and 2A sink/source LDO. Features 0.8% VREF accuracy, D-CAP2 mode, selectable 500/670kHz frequency, and thermal shutdown. Compact 20-pin WQFN package for space-constrained designs.
TPS51225BRUKR TPS51225CRUKR Dual Sync Step-Down Controller 5.5V to 24V Input 5V 3.3V Output
Cost-effective dual synchronous buck controller for notebooks. Features 5V and 3.3V LDOs, adaptive on-time control, 300kHz/355kHz frequency, and ±1% accuracy. Supports OOA or auto-skip light load. Available in 20-pin QFN package. Operating temp -40°C to 85°C.
TPS51220RHBR Dual Synchronous Buck Regulator Controller 4.5V to 28V Input 1V to 12V Output QFN-32
Dual synchronous buck regulator controller with 2 LDOs, optimized for notebook system power. Supports 4.5V to 28V input, 1V to 12V output, 99% duty cycle, and selectable peak current or D-CAP mode. Fixed frequency 200kHz to 1MHz. Available in QFN-32 package, -40°C to 85°C.
TPS51220ARTVR Dual Synchronous Buck Regulator Controller 4.5V to 32V Input 200kHz to 1MHz QFN-32
Dual synchronous buck regulator controller with two LDOs, optimized for notebook system power. Supports 4.5V to 32V input, 1V to 12V output, 99% duty cycle, selectable current or D-CAP mode, and 200kHz to 1MHz fixed frequency. Available in QFN-32 package.
TPS51219RTER Synchronous Step-Down Controller 3V-28V Input 0.5V-2.0V Output 20A+
High-performance single synchronous step-down controller with adaptive on-time control. Features differential voltage feedback, DC compensation, and selectable D-CAP/D-CAP2 modes. Supports up to 20A+ output. Ideal for notebook I/O supplies and POL applications. Available in 16-pin QFN package.
TPS51216RUKR Memory Power Synchronous Buck Controller 3V-28V 2A LDO QFN
Integrated DDR2/DDR3/DDR3L power solution with synchronous buck controller, 2A sink/source LDO, and buffered VTTREF. Features 0.8% accuracy, fast transient response, and protections. Compact 20-pin QFN package for space-constrained designs.
TPS51206DSQR DDR Termination Regulator PMIC 2A Peak Sink Source 3.3V 5V
The TPS51206DSQR is a 2A peak sink/source DDR termination regulator with VTTREF buffered reference. Supports DDR2/3/3L/4, requires only 10-μF MLCC output capacitor, ±20mV accuracy. Available in 2mm x 2mm SON package, operates from -40°C to 105°C.
TPS51020DBTR Dual Synchronous Buck Controller 4.5V to 28V Input 30-Pin TSSOP
Multi-function dual synchronous step-down controller for notebook power. Features 4.5V-28V input, selectable DDR mode, 180° phase shift, integrated bootstrap diodes, and 1% reference. Ideal for high-efficiency DDR termination and I/O applications.
TPS5430MDDAREP 5.5-36V 3A 500kHz Step Down Switching Voltage Regulator IC
High-efficiency 95% step-down converter with 110-mΩ MOSFET. Wide input 5.5-36V, up to 3A output. Internal compensation, overcurrent/thermal protection. Supports -55°C to 125°C. Ideal for industrial, automotive, and defense power systems.
TPS5430DDAR 5.5-36V Input 3A Step Down Converter Switching Voltage Regulator
High-efficiency up to 95% with 110-mΩ integrated MOSFET. Wide 5.5-36V input, 3A continuous output. Internal compensation, 500kHz switching, overcurrent/thermal protection. Ideal for industrial, consumer, and automotive power supplies.
TPS54302DDCR 3A Synchronous Buck Converter 4.5V to 28V Input SOT-23
The TPS54302 is a 4.5V to 28V input, 3A synchronous buck converter with integrated MOSFETs and internal loop compensation. Features frequency spread spectrum for EMI reduction, hiccup overcurrent protection, and Eco-mode for high efficiency. Ideal for 12V/24V industrial power supplies.
TPS54294RSAR Dual 2A Output Synchronous Buck Converter 4.5-18V Input Voltage Regulator
The TPS54294RSAR is a dual synchronous buck converter with 4.5-18V input and dual 2A output. Features D-CAP2 control for fast transient response, no external compensation, and high efficiency. Includes OCP, OVP, UVP, UVLO, and TSD protections. Ideal for point-of-load regulation in digital TV, networking, and STB applications.