Communication Cable
EV Relay Wire Harness
Main contactors for high‑power charging of AEV / EV‑B, adopting 2‑core standard cables equipped with Yakazi (7282‑1020) connectors. No wire modification or adapter conversion required, delivering zero‑assembly tolerance error. The cable model complies with UL3266, 22 AWG, constructed with XLPE halogen‑free flame‑retardant material. Its maximum operating temperature reaches 125 °C, conforming to ELV automotive‑environmental regulations. This cable is compatible with EV‑Series
EE‑SX674‑WR Photoelectric Switch Cable
Integrated U‑shaped slot with integrated emitter and receiver, slot width 5 mm, capable of detecting thin blocking sheets ≥ 2 × 0.8 mm; clearance tolerance ≤ 0.025 mm, ultra‑high positioning repeatability with zero offset for home‑position limit. Adopts 940 nm DC infrared‑light source, resistant to strong‑workshop‑light and fluorescent‑lamp interference to avoid false‑triggering. Response time 0.17 ms, maximum detection frequency up to 1 kHz, suitable for high‑speed assembly
D‑Sub 9‑pin RS232 Serial Connection Cable
The connector is fitted with built‑in metal fixing screws at both ends. After tightening, it will not loosen due to vibration or pulling force, which is suitable for permanent‑fixed wiring, on‑board vehicle equipment and high‑vibration working environments. Adopting industrial‑grade galvanized full‑metal shielding, it can effectively suppress signal interference. Operating temperature range: −40 to 85 ℃. Withstand voltage: AC 1000 V / 1 min. Insulation resistance: ≥ 1000 MΩ.
JWPF-4P Terminal Wiring Harness
JWPF connectors accommodate cables of 24 AWG to 22 AWG with an insulation outer diameter of φ1.4-1.7 mm. The housing comes with a dual locking system consisting of integrated housing lance terminal locks and internal retaining latches to prevent loosening under vibration conditions. This cable is compatible with vehicle LED lights, sensors, window microswitches, internal waterproof control cables for smart home appliances, and waterproof wiring harness designs for small
RJ45 8P8C Network Cable
8-pin 8-contact Ethernet cable, compatible with multiple cable types including Cat5e, Cat6, Cat6A and Cat7. Its 90-degree bending design drastically saves installation space, ideal for tight mounting against cabinet backplanes with limited clearance. Equipped with 8 gold-plated phosphor bronze pins, it complies with TIA-568 standards: 1 Gbps gigabit transmission for Cat5e and stable 10 Gbps transmission for Cat6A. It supports power supply over Ethernet (PoE / PoE++). This
GH1.25‑9P Terminal Wire Harness
1.25mm ultra-fine single-row connector for weak-current signals and low-power auxiliary power supply. Features locking structure to prevent disconnection and misinsertion with low mating force. 28 AWG wire, 500 mA operating current, -40 to +80℃ temperature range.
Energy‑storage Cabinet Inter‑cabinet Communication Harness
CAN, RS485 Signal Assembly + Power Supply and Fan Power Harness. Features 16/20 AWG wires, IP67 rating, -40 to +105℃ range, 300V rating, 3A current, 3m length, 8-pin wire-to-wire connectors with PVC insulation and tinned copper conductors.
D‑Sub 25‑pin to D‑Sub 15‑pin + D‑Sub 9‑pin Double‑Shielded Coaxial Cable
This single‑end D‑Sub 25‑PIN splitter harness features one cable diverging into two branches. It terminates with a D‑Sub 15‑PIN signal channel and a standalone coaxial RF line with D‑Sub 9‑PIN connectors, enabling simultaneous transmission of serial‑control signals, analog‑video signals and high‑frequency RF signals. The communication cable adopts a double‑composite shielding structure to deliver robust resistance against EMI and RFI interference. Coaxial cables are available
OBD‑II Female Adapter Cable
The connector housing adopts PA66 material with flame rating UL94 V‑0. The cable is constructed from PUR material, featuring oil‑corrosion resistance, UV‑resistance and crack‑resistance under repeated‑bending. This cable is compatible with automotive‑diagnostic tooling and production‑line test instruments.
TPU/PUR Coiled Cable
Constructed from TPU / PUR materials. The static coiled cable can stretch to 3‑5 times its original length and retracts automatically and promptly upon release. Its rated voltage stands at 300 / 500 V, compatible with low‑voltage signal transmission and power supply. The cable maintains stable performance without fatigue after no less than 5‑million stretching cycles. This cable is compatible with industrial‑automation, CNC machine‑tools, robotic‑equipment, power‑tools and
USB BF to PH1.25‑4P Communication Cable
The contacts of USB‑BF are gold‑plated for anti‑oxidation performance, with a mating durability of ≥ 10,000 insert‑pull cycles. Built‑in M3 nuts inside the plug enable direct mounting onto equipment enclosures and industrial‑control panels with M3 screws. This USB 2.0 connector supports a transfer speed of 480 Mbps. It adopts a 5‑pin configuration (VBUS, D+, D‑, GND and shield‑GND), and the maximum power‑supply current is 1.5 A. This cable is used for: 1. Industrial
SF1210/P3 to PT100 Temperature Sensor
SF12 push‑pull self‑locking circular connector perfectly matches 3‑wire PT100 platinum‑resistance sensors. It features a resistance value of 100 Ω at 0 °C and complies with the IEC 60751 standard. The 3‑wire design eliminates resistance errors caused by connecting cables. Built with a 1210‑packaged thin‑film platinum‑sensing element, the sensor boasts compact size and fast‑response speed. The cable adopts double‑shielding: inner aluminum‑foil layer plus outer tinned‑copper
SMA Radio‑Frequency / Power Composite Cable
Characteristic impedance of the product is 50 Ω (75 Ω customizable). Operating frequency: DC to GHz. It features low VSWR: standard ≤ 1.5. The cable boasts high‑voltage resistance and low leakage, with excellent RF‑signal isolation to suppress outward‑radiation interference. Matched with RG316 coaxial cable, it delivers high‑temperature resistance and low‑signal loss. An additional power‑wire is integrated to supply power to instruments simultaneously. This cable is
HD16‑9‑1939S80 to D‑Sub 26‑pin Diagnostic Cable
The D‑Sub 26‑PIN connector adopts the industry‑standard 3‑row 26‑pin layout with locking screws, enabling secure direct mounting on equipment panels. The J1939 Type 2 circular connector supports 12 V / 24 V power supply for commercial‑vehicles and CAN‑bus communication. This cable is compatible with heavy‑duty commercial‑vehicle J1939 professional diagnostic equipment and heavy‑duty controllers for industrial‑automation.
OBD‑II 16‑pin Male to OBD‑II 16‑pin Female with RJ45 Network Port
The cable is equipped with an additional RJ45 network port, enabling communication between vehicle CAN bus, automotive‑Ethernet and standard IP networks. It supports high‑speed DoIP diagnostics and network‑based transmission of vehicle data. This cable is dedicated to BMW ENET and new‑energy‑vehicle DoIP diagnosis.
JAE‑Series Battery Signal Acquisition Cable
JAE Series Battery Signal Acquisition Cable for new energy vehicles, photovoltaic and energy storage. Features 2.2mm pitch, retainer structure, miniaturized 0.64mm terminals with double-layer spring design, saving space and ensuring reliable contact. Complies with LV214 automotive standards.