Liquid-Liquid Filtration System
Liquid-Liquid Separation Coalescer Filter System with Activated Carbon Type Customized
Product Parameters Name Packing Type Coalescer Filter System Separation effect content of dispersion phase at downstream of packing coalescer ≯50ppm Initial pressure differential ≤20KPa Cleaning pressure differential 100KPa Liquid-liquid separation effect content of dispersion phase at downstream of packing coalescer ≯50ppm Gas-liquid separation effect removal rate over 99.9% for gas-containing liquid drop over 5um. APPLICATION SCENARIOS + Filtration and dehydration of
Customizable Liquid-Liquid Separation/Filter Element Type Filter for Various Applications
Product Parameters Name Filter Element Type Filter Filtration rating 0.5um-100um Initial pressure differential
Liquid-Liquid Separation Metal Filter Connector with Large Flux and Customized Design
Product Parameters Name Large Flux Filter Filtration rating ≥0.5um Filtration efficiency 99.9% Initial pressure drop below 20Kpa Pressure drop for replacement below 100Kpa (recommended) Maximum high-pressure difference 0.35MPa APPLICATION SCENARIOS + Amine filtration of amine treatment unit; + Pre-filtration of condensing water treatment system; + Filtration of fine treated resin of condensed water; + Pre-filtration before coalescer of process water; + Filtration of oilfield
Liquid Hydrocarbon Filtration and Separation Device Filter Low Operating Pressure Drop
Product Parameters Name Liquid Hydrocarbon Filtration and Separation Device Separation effect water content at outlet (free water)>20ppm Initial pressure differential ≤ 20Kpa Recommended pressure differential for filter element replacing 100KPa Maximum working temperature 120ºC APPLICATION SCENARIOS + Chemical engineering factory: dehydration of propylene, benzene, and ethylene feed; + Oil refining factory: removal of alkali liquid or water from fluid products, water removal