Digital Power Amplifiers
18 Inch 2000w 4 Channel Professional Power Amplifier
4x2000W Professional High Fidelity Audio High Power Equipment Digital Amplifier Product Description 8 Ω/stereo: 4 x 2000 w 4 Ω/stereo: 4 x 3400 w 2 Ω/stereo: 4 x 4760 w 16 Ω/bridge: 2 x 4000 w 8 Ω/bridge: 2 x 6800 w 4 Ω/bridge: 2 x 11560 w stereo, single channel, bridge three working modes sensitivity 1Vrms, gain 32dB, 26dB optional male Canon input port Speakon output jack RMS output voltage (THD=1%,1kHz) : 44.7v voltage gain: 33.0db rising slope (1kHz, bypass low-pass
Bar 34KHz Stereo 1200W Digital Power Amplifiers
Professional 1200W*4 power amp 1U class d sound digital power amplifier Product Description 8 Ω/stereo: 4 x 1200 w 4 Ω/stereo: 4 x 2000 w 2 Ω/stereo: 4 x 3400 w 16 Ω/bridge: 2 x 2400 w 8 Ω/bridge: 2 x 4000 w 4 Ω/bridge: 2 x 6800 w stereo, single channel, bridge three working modes sensitivity 1Vrms, gain 32dB, 26dB optional male Canon input port Speakon output jack RMS output voltage (THD=1%,1kHz) : 44.7v voltage gain: 33.0db rising slope (1kHz, bypass low-pass filter) : 50V
2600w 2 Channel Audio Amplifier
Performance overview 1. High efficiency and energy saving, operation cost is low, 2. Compact and light weight,structure is firm. 3. Comply with the safety and EMC standards. 4. 110/220V AC / 50~60HZ Wide range power supply. 5. First-class quality, thanks for the components from international high-end manufacturers. 6. Temperature control fan for quiet operation. 7. Modular design and maintenance is convenient. 8. Very suitable for mobile show.
Small Shows AC220V 10.5kg Digital Power Amplifiers
Product Description 8 Ω/stereo: 4 x 1100 w 4 Ω/stereo: 4 x 1830 w 2 Ω/stereo: 4 x 2700 w 8 Ω/bridge: 2 x 3660 w 4 Ω/bridge: 2 x 5000 w Signal To Noise Ratio below rated power 20Hz to 20KHz,A-Weighted: >100dB Slew Rate: >50v/μs Damping factor: >3200 Power Supply: 180V-260V 50-60Hz Input Sensitivity: 0.775V 1V 1.4V 2V Frequency Response @1 Watt into 8 Ohm: ±0.3dB, 20Hz -20kHz THD+N: ≤0.05% @ 8Ω1kHz IMD: ≤0.05% @ 8Ω at rate output Input Impedance: 20k Ohm Balanced or10k Ohm
2U 8 Channel Power Amplifier
Product Description The M-Series amplifiers ultra-low distortion output (relatively unheard of in other multi-zone amplifiers) allows for clean, undistorted audio even at high listening volumes. A robust protection circuit provides efficient, safe and reliable operation under extreme conditions and protects each amplifier output channel. 8 ohm stereo output power: 300 w x 8 4 ohm stereo output power: 500 w x 8 Bridge 8 ohm power: 1000 w x 4
Overload Protection 2 Channel 3400w Digital Power Amplifiers
Professional Karaoke Meeting 1U Digital Power Amplifier Product Description 8 Ω/stereo: 2 x 650 w 4 Ω/stereo: 2 x 1100 w 2 Ω/stereo: 2 x 1700 w 16 Ω/bridge:1300 w 8 Ω/bridge: 2200 w 4 Ω/bridge: 3400 w stereo, single channel, bridge three working modes sensitivity 1Vrms, gain 32dB, 26dB optional male Canon input port Speakon output jack RMS output voltage (THD=1%,1kHz) : 44.7v voltage gain: 33.0db rising slope (1kHz, bypass low-pass filter) : 50V/us input sensitivity (rated
20Hz Four Channels 1600w Digital Power Amplifiers
Product Description 8 Ω/stereo: 4 x 1600 w 4 Ω/stereo: 4 x 2650 w 2 Ω/stereo: 4 x 3950 w 8 Ω/bridge: 2 x 5300 w 4 Ω/bridge: 2 x 7000 w Signal To Noise Ratio below rated power 20Hz to 20KHz,A-Weighted: >100dB Slew Rate: >50v/μs Damping factor: >3200 Power Supply: 180V-260V 50-60Hz Input Sensitivity: 0.775V 1V 1.4V 2V Frequency Response @1 Watt into 8 Ohm: ±0.3dB, 20Hz -20kHz THD+N: ≤0.05% @ 8Ω1kHz IMD: ≤0.05% @ 8Ω at rate output Input Impedance: 20k Ohm Balanced or10k Ohm
AC220V OEM Banquet Hall 100db Class D Audio Amp
Product Description 8 Ω/stereo: 2 x 1600 w 4 Ω/stereo: 2 x 2650 w 2 Ω/stereo: 2 x 3950 w 8 Ω/bridge:5300 w 4 Ω/bridge:7000 w Signal To Noise Ratio below rated power 20Hz to 20KHz,A-Weighted: >100dB Slew Rate: >50v/μs Damping factor: >3200 Power Supply: 180V-260V 50-60Hz Input Sensitivity: 0.775V 1V 1.4V 2V Frequency Response @1 Watt into 8 Ohm: ±0.3dB, 20Hz -20kHz THD+N: ≤0.05% @ 8Ω1kHz IMD: ≤0.05% @ 8Ω at rate output Input Impedance: 20k Ohm Balanced or10k Ohm Unbalanced
6 Stepless Small Stage 1100w Digital Power Amplifiers
Product Description In digital power amplifiers the analog signal is not handled directly but encoded in a pulse train. It is restored only at the output by a bandpass filter. Due to the discretization in amplitude, this principle, often referred to as class D, allows for efficient and versatile amplifiers. While in widespread use for audio frequencies, digital PAs have been introduced at microwave frequencies only a few
15 Inch CE Stage Class d 2000w Digital Power Amplifiers
2000W Class d Digital professional High Power Amplifier Product Description 8 Ω/stereo: 2 x 2000 w 4 Ω/stereo: 2 x 3400 w 2 Ω/stereo: 2 x 4760 w 16 Ω/bridge:4000 w 8 Ω/bridge: 6800 w 4 Ω/bridge: 11560 w stereo, single channel, bridge three working modes sensitivity 1Vrms, gain 32dB, 26dB optional male Canon input port Speakon output jack RMS output voltage (THD=1%,1kHz) : 44.7v voltage gain: 33.0db rising slope (1kHz, bypass low-pass filter) : 50V/us input sensitivity (rated
Home Bar 1.5u Four Channels 800w Digital Power Amplifiers
Product Description The DF-4A800 is a 4-Channel Digital Power Amplifier featuring lightweight, compact, high power output, and high efficiency. It delivers 1480W × 4 channels (4 Ω output) using a switching power supply. Each channel is equipped with an independent power section. It can be mounted in an EIA Standard equipment rack (1.5 unit size). 1. 4x800W at 8 ohms, 4x1480W at 4 ohms 2. innovated high-efficiency
20Hz Stage 1300w 4 Channel Professional Power Amplifier
Product Description 8 Ω/stereo: 4 x 1300 w 4 Ω/stereo: 4 x 2150 w 2 Ω/stereo: 4 x 3200 w 8 Ω/bridge: 2 x 4300 w 4 Ω/bridge: 2 x 6000 w Signal To Noise Ratio below rated power 20Hz to 20KHz,A-Weighted: >100dB Slew Rate: >50v/μs Damping factor: >3200 Power Supply: 180V-260V 50-60Hz Input Sensitivity: 0.775V 1V 1.4V 2V Frequency Response @1 Watt into 8 Ohm: ±0.3dB, 20Hz -20kHz THD+N: ≤0.05% @ 8Ω1kHz IMD: ≤0.05% @ 8Ω at rate output Input Impedance: 20k Ohm Balanced or10k Ohm
Black High End KTV 7.5kg 1100w Digital Power Amplifiers
Product Description 8 Ω/stereo: 2 x 1100 w 4 Ω/stereo: 2 x 1830 w 2 Ω/stereo: 2 x 2700 w 8 Ω/bridge: 3660 w 4 Ω/bridge: 5000 w Signal To Noise Ratio below rated power 20Hz to 20KHz,A-Weighted: >100dB Slew Rate: >50v/μs Damping factor: >3200 Power Supply: 180V-260V 50-60Hz Input Sensitivity: 0.775V 1V 1.4V 2V Frequency Response @1 Watt into 8 Ohm: ±0.3dB, 20Hz -20kHz THD+N: ≤0.05% @ 8Ω1kHz IMD: ≤0.05% @ 8Ω at rate output Input Impedance: 20k Ohm Balanced or10k Ohm Unbalanced
Banquet Hall 1U Two Channels 2000w Digital Power Amplifiers
Product Description Suitable for Big Power Outdoor Events Show Speaker System. Powerful cabability for LongThrough Subwoofer Speaker, Line Array Speaker Builded in cooling considition system , support long time working 6 models with different power range for you select. Suitable for all kind of events speaker system. 8 Ω/stereo: 2 x 2000 w 4 Ω/stereo: 2 x 3300 w 2 Ω/stereo: 2 x 5000 w Signal To Noise Ratio below
10k Ohm Unbalanced 70db 1U Class D Digital Amplifier
Product Description 8 Ω/stereo: 4 x 700 w 4 Ω/stereo: 4 x 1150 w 2 Ω/stereo: 4 x 1730 w 8 Ω/bridge: 2300 w 4 Ω/bridge: 3000 w Signal To Noise Ratio below rated power 20Hz to 20KHz,A-Weighted: >100dB Slew Rate: >50v/μs Damping factor: >3200 Power Supply: 180V-260V 50-60Hz Input Sensitivity: 0.775V 1V 1.4V 2V Frequency Response @1 Watt into 8 Ohm: ±0.3dB, 20Hz -20kHz THD+N: ≤0.05% @ 8Ω1kHz IMD: ≤0.05% @ 8Ω at rate output Input Impedance: 20k Ohm Balanced or10k Ohm Unbalanced
10.5kg Small Outdoor Stage 900w Digital Power Amp
Class D-PWM High efficient output level, this technology was imported by Powersoft in 1995, which has been adopted by more and more manufacturers and end users. The key part is super high efficient, convert all the power to the available power, and recycle using the reactive power from the sound box( It’s harmful for the traditional power amplifier.) The equipment which used this technology provides very useful features for
CE Four Channel Subwoofer 1600w Digital Power Amplifiers
Must know before buying 1. Impedance Matching : Our PB-4A1600 power amplifier is stably working at 2ohms/4ohms, 8ohms, the power up to 3950w 2. How to match our amplifier with your speaker ? Output power of PB-4A1600 should be 1.5 time bigger than Rated Power of Speaker .( not recommend for subwoofer) For example, Under 8ohm impedance conditions, our PB-4A1600 suitable for the speaker which is rated power around 1050W
44.7V 20HZ 4 Channels 650 Watts Stereo Power Amp
Hot Selling 4 Channels Digital 650 Watts Power Amplifier Product Description 8 Ω/stereo: 4 x 650 w 4 Ω/stereo: 4 x 1100 w 2 Ω/stereo: 4 x 1700 w 16 Ω/bridge: 2 x 1300 w 8 Ω/bridge: 2 x 2200 w 4 Ω/bridge: 2 x 3400 w stereo, single channel, bridge three working modes sensitivity 1Vrms, gain 32dB, 26dB optional male Canon input port Speakon output jack RMS output voltage (THD=1%,1kHz) : 44.7v voltage gain: 33.0db rising slope (1kHz, bypass low-pass filter) : 50V/us input
Audio Digital Power Amplifiers 4500w 1U PFC Function Equipped
Product Description 8 Ω/stereo: 2 x 4500 w 4 Ω/stereo: 2 x 8400 w 2 Ω/stereo: 2 x 9000 w Signal To Noise Ratio below rated power 20Hz to 20KHz,A-Weighted: >100dB Slew Rate: >60v/μs Damping factor: >4000 Power Supply: 180V-260V 50-60Hz Input Sensitivity: 0.775V 1V 1.4V 2V Frequency Response @1 Watt into 8 Ohm: ±0.3dB, 20Hz -20kHz THD+N: ≤0.05% @ 8Ω1kHz IMD: ≤0.05% @ 8Ω at rate output Input Impedance: 20k Ohm Balanced or10k Ohm Unbalanced Crosstalk at Rated Output 8 Ohms 1kHz:
9kg Home KTV Bar Concert 2 Channel 1.5u 800 Watt Amplifier
Product Description 8 Ω/stereo: 2 x 800 w 4 Ω/stereo: 2 x 1480 w 2 Ω/stereo: 2 x 1776 w 8 Ω/bridge: 2800 w 4 Ω/bridge: 3360 w Signal To Noise Ratio below rated power 20Hz to 20KHz,A-Weighted: 113dB Slew Rate: >28v/μs Damping factor: >240(1KHz,8ohm) Power Supply: 90V-264V 50-60Hz Input Sensitivity: 0.775V 1V 1.4V 2V Frequency Response @1 Watt into 8 Ohm: ±1dB, 5Hz -20kHz THD+N: ≤0.05% @ 8Ω1kHz IMD: ≤0.05% @ 8Ω at rate output Input Impedance: 20k Ohm Balanced or10k Ohm