Optical Products
Series Lead Down Clamp Fiber Optic Cable Fittings
Product Details Brand: Dawnergy Product: Series Lead Down Clamp Main Material: Galvanized Steel/Stainless Steel 304 Available Cable Diameter (mm): ≤14.3 Or 14.4~17 Dimension: 20mm (W) × 0.5mm (T) × 1200mm (L) Or 20mm (W) × 0.5mm (T) × 1500mm (L) Insulated Clamping Block: Yes Highlight: Galvanized Steel Cable Down Clamp , Fiber Optic Cable Down Clamp , Stainless Steel 304 Fiber Cable Clamp Payment & Shipping Terms Minimum Order Quantity 100 Delivery Time 7~14day Payment Terms
ITU-T G.652D Optical Fiber
Product standards Fibre complies with or exceeds the ITU-T Recommendation G.652. D and the IEC 60793-2-50 typeB1.3 Optical Fibre Specification. Characteristics • Designed for operation over the full optical spectrum from 1260-1625 nm, which provides 50% more usable wavelengths and hence the transmission capacity is increased • Outstanding optical performance supporting high-speed transmission technologies such as DWDM and CWDM • Being compatible with existing 1310 nm
4 Port Small FDB Box
1.Product Description: OTB-04 is a small plastic fiber optic terminal box for fiber splicing, connection, and distribution. It can load 2pcs SC simplex adapter for wall mounted application. 2.Features: ABS plastic material. Rotary splice tray with 4 splicing slots, easy for operation. 2 cable port for max.φ8.0mm cable entry/exit. Max. 2 SC simplex or 2 LC duplex adapter. The cover is fixed by screw in the middle. 3.Specification: Model Dimension W*H*D (mm) Material Adapter
48core Fiber Optic Terminal Box OTB-48
1. Product Description: Fiber optic drop cable terminal box OTB-S48 is used as a termination point for the feeder cable to connect with drop cable. The fiber splicing, splitting, distribution can be done in this box, and meanwhile it provides solid protection and management for the FTTx network building. 2.Features: Standard size, light weight and reasonable enclosed structure. Material: ABS plastic, water-proof IP65. Clamping for feeder cable and drop cable, fiber splicing,
24core outdoor Fiber Optic Terminal Box
1. Product Description: OTB-24 Terminal Box is made of high-quality ABS Plastic material. It’s mainly used for indoor wall-mounted installation.Box cover with locks prevent illegal open the box.Suitable for fiber optic cable&pigtail splicing and protection. 2.Features: With two kinds of fiber modules interchangeable, one module for 24cores splice, another module can install 1*16 PLC splitter or 2 pcs 1*8 PLC splitter; Max. for 2pcs ¢15 mm cable input, Supporting cable uncut
8core Fiber Optic Terminal Box
1. Product Description: Fiber optic terminal box that use for loading plastic fiber optic splitter cassette for the distribution and terminal connection of various kinds of optical fiber system, especially suitable for mini-network terminal distribution. It can be outdoor wall mounted, pole mounted application. 2.Features: Material: High quality plastic with UV resistance Black or white color optional. Inside splice tray can accommodate 2pcs 1x8 or 1pc 1x16 PLC splitter
Fiber Optic Terminal Box
1.Basic information It is an outdoor fiber optic terminal box with 3 U-shape ports and 9 output ports. It can load PLC steel tube type splitter and 8 SC simplex adapters for fiber connection and distribution. 2.Features: Material: ABS plastic IP standard: IP65 Color: white or black Cable ports: 3pcs U-shape cable ports, 9pcs output ports Can load PLC steel tube type splitter 1x4, 1x8 Application: outdoor wall mounted or pole mounted 3.Specification: Model Dimension (mm)
72 Port Outdoor Wall Mounted Patch Panel
1. Product Description: Outdoor Wall-mount Fiber Optic Distribution Frame is mainly used for connecting the outdoor optical cables, optical patch cords and optical pigtails. It can be wall mounted or pole mounted, and facilitates the test and refit of the lines. 2. Features: v With steel plates can manage both single fiber and ribbon & bundle fiber cables v FC, LC, SC, ST output interfaces optional v Large working space to integrate the pigtail, cables and adapters v Made of
48 Port Outdoor Wall Mounted Patch Panel
1. Product Description: Outdoor wall type fiber optic distribution frame is mainly used for connecting the outdoor optical cables, optical patch cords and optical pigtails. It can be wall mounted or pole mounted, and facilitates the test and refit of the lines. 2. Features: v With plastic plates can manage both single fiber and ribbon & bundle fiber cables v Large working space to integrate the pigtail, cables and adapters v Made of cold roll steel, static spreading-plastic,
24 Port Outdoor Wall Mounted Patch panel
1. Product Description: Outdoor wall type fiber optic distribution frame is mainly used for connecting the outdoor optical cables, optical patch cords and optical pigtails. It can be wall mounted or pole mounted, and facilitates the test and refit of the lines. 2. Features: v With plastic plates can manage both single fiber and ribbon & bundle fiber cables v FC, LC, SC, ST output interfaces optional v Large working space to integrate the pigtail, cables and adapters v Made of
Indoor fiber optic patch panel
1. Product Description: Indoor wall type fiber optic distribution frame can manage single fiber, ribbon & bundle fiber cables for indoor using. There are FC, LC, SC, ST output interfaces optional, and large working space to integrate the pigtails, cables and adapters. 2. Features: With cold-roll steel box, splicing unit, distribution unit and panel Various panel plate to fit different adapter interface Adapters can be installed: FC, SC, ST, LC Suitable for single fiber and
Outdoor Wall Mount Distribution Box
1. Product Description: This is an outdoor wall mount distribution box, used for fiber splicing and splitting. Its material is cold-rolled steel, with electrostatic spraying. 2. Features: 1) Waterproofing grade: IP65 2) Unique design of splice tray, which can be slided out separately. 3) It can load splitters inside, and the output can be use for drop cable. 4) Pole Mount or Wall Mount 3. Product size Model W(mm) H(mm) L(mm) Splice tray Adapter 16 310 370 121 2 16 24 310 370
Fiber Optic Terminal Box
1.Basic information It is an outdoor fiber optic terminal box with 2 PG cable gland ports and 9 output ports for fiber distribution. It is used for loading 1pc 1x8 cassette splitter. 2.Features: Material: ABS plastic IP standard: IP65 Color: white or black Cable ports: 2 M20 cable gland ports, 9 output ports Can load 1pc 1x8 splitter cassette Application: outdoor wall mounted or pole mounted
Fiber Optic Splitter Box
Wall mount Optic Splitter Box with cold rolled steel material modular splitter easy to operate and good interchangeability.
Slidable rack mounted fiber optical patch panel
Max to 48 fibers slidable rack mounted type
24 Ports Fixed Rack-mounted ODF
1. Product Description: It is made of 1U 19” cold-roll steel box, with plastic splice tray inside, suitable for pigtail, ribbon and bunch cable distribution. It provides an economical way of splicing fiber cables in communication room or existing equipment racks where space is constrained. 2. Features: Standard size, light weight and reasonable structure FC, SC, ST, LC adapter patch panel for option Front access panel design for easy operation Suitable for 19’’ or 23’’
Slidable rack mounted fiber optical patch panel
1. Product Description: Slidable Rack-mount Fiber Optic Distribution Frame ODF-RS24-A45 has aluminum sliding fittings with self-locking functions prevent the drawer from falling when moved; The drawer is the holding board for splicing, easy to withdraw the fibers when testing and distributing. 2. Features: Material:Cold-roll steel Standard size, light weight and reasonable structure Slide out drawer for easy cable management and operation. Suitable for ribbon and single fiber
96 FO MPO Fiber Optic Distribution Frame
1. Product Description: This high capacity fiber optic distribution frame support fiber cable fast connection and distribution. It load MTP/MPO and ribbon fiber cable inside, easy to use by connector plug. It is an ideal equipment for supporting the fiber distribution in high-density capacity data center. It has simple & fast installation, compact design, high precision, plug and play etc. advantages 2. Features: Made by cold roll steel, electrostatic powder spraying. Fixed
120 cores Fiber optic patch panel
1. Product Description: It is made of cold roll steel, splice tray can be rotated out. It could be pre-installed with various kinds of fiber optic adapters and pigtails. It is ideal for indoor fiber optic cables connection storage, distribution and management 2. Features: Standard size, can be rackmount and wallmount Splice tray inside changeable Can be used in 19', 23' standard distribution frame Suitable for ribbon and single fiber Various panel plate to fit different
Fixed type rack mounted fiber optical patch panel
1. Product Description: It is made of 1U 19” cold-roll steel box, with plastic splice tray inside, suitable for pigtail, ribbon and bunch cable distribution. It provides an economical way of splicing fiber cables in communication room or existing equipment racks where space is constrained. 2. Features: Standard size, light weight and reasonable structure FC, SC, ST, LC adapter patch panel for option Front access panel design for easy operation Suitable for 19’’ or 23’’