Flash Memory IC Chip
SN74LVC2G125DCTR Dual Bus Buffer Gate 1.65V to 5.5V Line Driver 3-State Outputs
High-speed dual bus buffer gate with 3-state outputs, supports 1.65V to 5.5V VCC. Features ESD protection, low power consumption (10-μA max ICC), and Ioff for live insertion. Ideal for data acquisition, motor controls, and video broadcasting.
SN74LVC1G86DCKR Single 2-Input XOR Gate 1.65V to 5.5V Logic Gate IC
Single 2-input exclusive-OR gate operating from 1.65V to 5.5V. Features ESD protection, low power consumption (10μA max ICC), and fast propagation delay (4ns at 3.3V). Supports partial-power-down mode with Ioff. Ideal for motor drives, audio, and set-top boxes.
SN74LVC1G32DBVR Single 2-Input OR Gate Logic IC 1.65V to 5.5V 3.6ns
Single 2-input positive-OR gate for 1.65V to 5.5V operation. Features ultra-small 0.64mm² package, 3.6ns max propagation delay, low 10μA power consumption, and ±24mA output drive. Supports live insertion and partial-power-down mode. Ideal for high-speed data acquisition, motor control, and telecom equipment.
SN74LVC1G18DRYR 1-of-2 Non-Inverting Demultiplexer IC 1.65V to 5.5V 3-State Output
Texas Instruments SN74LVC1G18DRYR demultiplexer supports 1.65V to 5.5V VCC operation with 3.4ns max propagation delay. Features low power consumption (10μA max ICC), ±24mA output drive, and Ioff for partial-power-down applications. Available in NanoFree package.
SN74LVC1G17DBVR Single Schmitt-Trigger Buffer IC 1.65V to 5.5V 24mA Output
High-speed single Schmitt-trigger buffer with 4.6ns propagation delay at 3.3V. Supports 1.65V to 5.5V operation, ±24mA output drive, and low 10μA max ICC. Ideal for AV receivers, SSDs, and portable devices. Available in ultra-small 0.8mm x 0.8mm package.
SN74LVC1G175DCKR Single D-Type Flip Flop 1.65V to 5.5V SC70-6 1.25mm Width
Single D-type flip-flop with asynchronous clear, supports 1.65V to 5.5V operation. Features low power consumption (10μA max ICC), ±24mA output drive, and Ioff back-drive protection. Ideal for industrial, telecom, and consumer applications.
SN74LVC1G14DCKR Single Schmitt-Trigger Inverter IC 1.65V to 5.5V 32mA Output
Single Schmitt-trigger inverter IC with 1.65V to 5.5V VCC operation. Features ±24mA output drive, 10μA max ICC low power, and Ioff partial-power-down mode. ESD protection exceeds 2000V HBM. Available in multiple package options including SC70 and SOT-23. Ideal for portable audio, SSD, and HDTV applications.
SN74LVC1G14DBVR 5.5V Single Schmitt Trigger Inverter Low Power IC SOT-23
Single Schmitt-trigger inverter operating from 1.65V to 5.5V. Features low power consumption (10μA max ICC), ±24mA output drive, and ESD protection up to 2000V. Supports partial-power-down mode. Ideal for portable audio, SSD, and HDTV applications.
OP2177ARZ-REEL7 Dual Precision Amplifier IC Low Noise 60μV Offset 2nA Bias Current
High precision dual amplifier with 60μV max offset, 2nA bias current, and 8nV/√Hz noise. Operates from ±2.5V to ±15V, unity-gain stable, and ideal for instrumentation, sensors, and precision filters.
OP07CDR Precision Amplifier IC Low Offset Voltage ±3V to ±18V SOIC-8
Low-noise, chopperless bipolar-input amplifier with wide supply range ±3V to ±18V. No external components needed for offset nulling. Ideal for instrumentation, sensors, and precision filters. Available in SOIC-8 package.
LP339DR Quad Differential Comparator IC 3V to 30V Low Power 60μA
Low-power quadruple differential comparator IC with wide supply range 3V to 30V. Ultra-low 60μA drain current, low input offset voltage ±2mV, and CMOS compatible output. Ideal for battery-powered applications, ADCs, and pulse generators.
LMV932MM/NOPB Dual Operational Amplifier IC 1.4MHz RRIO 1.8V to 5.5V
Low-voltage dual op amp with rail-to-rail input/output, 1.4MHz gain bandwidth, and 100μA supply current per channel. Ideal for portable battery-powered devices. Operates from 1.8V to 5.5V. Available in ultra-small VSSOP package. Temperature range -40°C to +125°C.
LMV771MGX/NOPB Low Noise Precision Op Amp 3.5MHz 2.7V to 5V Rail-to-Rail Output
Single precision operational amplifier with 3.5MHz bandwidth, 850μV max offset, and rail-to-rail output. Low noise 7.5nV/√Hz at 10kHz. Ideal for transducer amps, current sensing, and portable electronics. Extended temp range -40°C to 125°C.
LMV7272 LMV7275 Dual 1.8V Low Power Comparator IC 9μA Rail to Rail Input
Ultra-low power rail-to-rail input comparators consuming only 9 μA per channel with 880 ns propagation delay. Ideal for battery-powered and space-critical designs. Available in tiny DSBGA, SC70, and SOT-23 packages. Supports single or dual supplies down to 1.8 V.
LMV7239M7X/NOPB Ultra Low Power 75ns Comparator 2.7V to 5.5V Rail-to-Rail Input
The LMV7239M7X/NOPB is an ultra low power comparator with 75ns propagation delay and 65μA supply current. Features rail-to-rail input, push-pull output, and operates from 2.7V to 5.5V. Ideal for portable systems, available in space-saving SC70 and SOT-23 packages.
LMV7219M5X/NOPB 7ns High Speed Comparator 2.7V to 5V Rail-to-Rail Output
Low-power, high-speed comparator with 7ns propagation delay and 1.1mA supply current. Features rail-to-rail output, internal hysteresis, and ground-sensing input. Ideal for portable systems, zero-crossing detectors, and high-speed sampling. Available in SC-70 and SOT-23 packages.
LMV611MF/NOPB Low Voltage Rail-to-Rail Op Amp IC 1.8V 1.4MHz SC70-5
Low voltage, low power operational amplifier ideal for portable and battery-powered electronics. Features rail-to-rail input/output, 1.8V supply, 1.4MHz bandwidth, and 100µA quiescent current. Extended temperature range -40°C to +125°C. Available in tiny SC70 package.
LMV331 LMV339 LMV393 Low Voltage Comparator IC 2.7V to 5.5V Single Dual Quad
Low voltage comparators operating from 2.7V to 5.5V with low supply current down to 130 μA. Features open-collector output, ground-sensing input, and 200 mV typical saturation voltage. Ideal for portable consumer and industrial applications.
LMV321 LMV358 LMV324 Operational Amplifier IC 2.7V to 5.5V Rail-to-Rail Output
Low-voltage op amps with rail-to-rail output, 130-410 µA supply current, and -40°C to 125°C operation. Ideal for portable audio, motor control, and HVAC. ESD protected, available in SOT-23, SC-70, and SOIC packages.
LMV2011MFX/NOPB Precision Amplifier IC 35μV Offset 3MHz Rail-to-Rail Output
High precision amplifier with 35μV offset, 130dB CMRR, and 3MHz bandwidth. Features rail-to-rail output, low noise, and no external capacitors. Ideal for instrumentation, thermocouple, and strain gauge applications.